Alecto SMARTCOA10 Smart Carbon Monoxide Alarm Instruction Manual
- June 6, 2024
- Alecto
Table of Contents
**Alecto SMARTCOA10 Smart Carbon Monoxide Alarm Instruction Manual
**
This sensor can only be liked on to a previously liked Zigbee bridge. We gurantee correct operation on the Alecto SMART-BRIDGE10.
Installation Instructions
ATTENTION!
- Make sure that the SMARTCOA10 is within range of the SMART-BRIDGE10 during the registration process.
- Keep away from liquids and humidity.
- See the detailed manual for installation and maintenance advice.
SPECIFICATIONS
Transport protocol: Zigbee
Wireless frequency: 2.4 GHz
Transmit power: 8 dBm
Transmission distance: < 30m (indoor) <100m open area
Working voltage: 2.6-3.3 V (1xCR1123A)
Alarm current: <13 mA
Standby current: <21 uA
Alarm signal: 85dB @3m
Lifespan: Up to 36 months (1 test weekly)
Operating system: Android 4.4+ or iOS 9.0+
Battery: lx CR123A
Working temperature: -10°C — 40°C
Relative humidity: 0% – 95%
Dimensions: 60×049 mm
Environment of use: Only indoor!
DECLARATION OF CONFORMITY
Hereby, Hesdo declares that the radio equipment type Alecto SMART-SMART10 is in compliance with directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
http://DOC.hesdo.com/SMARTCOA10-DOC.pdf
Hesdo BV Azielaan 12
5232 BA, ‘s-Hertogenbosch
The Netherlands