DEWALT DC9071 12 Volt Battery Replacement NiCd 2.4-Ah Instructions
- June 6, 2024
- Dewalt
Table of Contents
DEWALT DC9071 12 Volt Battery Replacement NiCd 2.4-Ah
Installing the Tool Connect™ Chip
- Remove the retaining screws 20 that hold the Tool Connect™ Chip protective cover 21 into the tool.
- Remove the protective cover and insert the Tool Connect™ Chip into the empty pocket 22 .
- Ensure that the Tool Connect™ Chip is flush with the housing. Secure it with the retaining screws and tighten the screws.
- Refer to Tool Connect™ Chip Instruction Sheet for further instructions.
Repairs
The charger and battery pack are not serviceable. There are no serviceable parts inside the charger or battery pack.
WARNING:
To assure product SAFETY and RELIABILITY, repairs, maintenance, and adjustment (including brush inspection and replacement, when applicable) should be performed by a DEWALT factory service center or a DEWALT authorized service center. Always use identical replacement parts.
Register Online
Thank you for your purchase. Register your product now for:
- WARRANTY SERVICE: Registering your product will help you obtain a more efficient warranty service in case there is a problem with your product.
- CONFIRMATION OF OWNERSHIP: In case of an insurance loss, such as fire, flood or theft, your registration of ownership will serve as your proof of purchase.
- FOR YOUR SAFETY: Registering your product will allow us to contact you in the unlikely event a safety notification is required under the Federal Consumer Safety Act.
- Register online at www.dewalt.com
Three Year Limited Warranty
DEWALT will repair or replace, without charge, any defects due to faulty
materials or workmanship for three years from the date of purchase (two years
for batteries). This warranty does not cover part failure due to normal wear
or tool abuse. For further detail of warranty coverage and warranty repair
information, visit www.dewalt.com or call
1‑800‑4‑DEWALT (1-800-433-9258). This
warranty does not apply to accessories or damage caused where repairs have
been made or attempted by others. THIS LIMITED WARRANTY IS GIVEN IN LIEU OF
ALL OTHERS, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE, AND EXCLUDES ALL INCIDENTAL OR CONSEQUENTIAL DAMAGES.
Some states do not allow limitations on how long an implied warranty lasts or
the exclusion or limitation of incidental or consequential damages, so these
limitations may not apply to you. This warranty gives you specific legal
rights and you may have other rights which vary in certain states or
provinces.
In addition to the warranty, DEWALT tools are covered by our:
1 YEAR FREE SERVICEDEWALT will maintain the tool and replace worn parts caused by normal use, for free, any time during the first two years. after purchase.
2 YEARS FREE SERVICE ON DEWALT BATTERY PACKS
DC9071, DC9091, DC9096, DC9182, DC9280, DC9360, DCB120, DCB122, DCB124,
DCB127, DCB201, DCB203BT, DCB207, DCB361
3 YEARS FREE SERVICE ON DEWALT BATTERY PACKS
DCB20E: Battery warranty voided if the battery pack is tampered with in any
way. DEWALT is not responsible for any injury caused by tampering and may
prosecute warranty fraud to the fullest extent permitted by law.
90 DAY MONEY-BACK GUARANTEE
If you are not completely satisfied with the performance of your DEWALT Power
Tool or Nailer for any reason, you can return it within 90 days from the date
of purchase with a receipt for a full refund – no questions asked.
LATIN AMERICA: This warranty does not apply to products sold in Latin
America. For products sold in Latin America, see country-specific warranty
information contained in
the packaging, call the local company or see the website for warranty
information.
FREE WARNING LABEL REPLACEMENT: If your warning labels become illegible
or are missing, call 1‑800‑4‑DEWALT
(1-800-433-9258) for a free
replacement.
DCG440 ACCESSORIES CHART
Approved wheels for use with DCG440
Non-approved wheels for DCG440
Type 27 Hubbed Grinding Wheels
Type 27, 28 Depressed Center Grinding Wheels
Documents / Resources
|
DEWALT DC9071 12 Volt Battery Replacement NiCd
2.4-Ah
[pdf] Instructions
DC9071, DC9091, DC9096, DC9182, DC9280, DC9360, 12 Volt Battery Replacement
NiCd 2.4-Ah
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>