E GATE I9 Pro-Max Multimedia Projector User Manual

**E GATE I9 Pro-Max Multimedia Projector User Manual

**

Notice

How to use the projector correctly:

1. Do not face to lens by eyes, it will hurt your eyes from hard Light of the projector when it’s working.
2. Do not block the air outlet, to avoid damage from internal electronic device by projector can not cooling.
3. Do not use chemicals, Cleaner or water to clean, and also avoid rain, moisture and leucocratic liquid to corrode circuit board.
4. Please put the projector and accessories on the place that children can not reach.
5. Please make sure the projector working environment is dry and windy.
6. Do not place projector in too warm or too cold room, the high temperature or low temperature will Shorten lifespan of the device. The working environment would be 5°C-35°C better.
7. Do not put the projector in heating equipment (drying machine, microwave oven)to make it dry.
8. Do not press hard or put something heavy on the projector, it will damage projector.
9. Do not throw, beat, shake projector, it will damage circuit board in it.
10. Do not dismounting projector. Please contact after-sales service if you have any problem.
11. Do not fix by yourself. if projector can not working normally, please consult with after-sales service or depot repair.

Product Overview

Note: please refer to the product appearance. this figure is for reference only.

1. Power
2. Arrow Keys
3. Confirm
4. Menu Button
5. Signal Source
6. Back
7. Lens Focusing
8. Keystone Correction
9. Audio, Video Input
10. Earphone/3.Smm Audio Out
11. Video HD1 Input 12. VGA Input
12. Media Card
13. Video HD2 Input
14. Multimedia Input
15. Power Input(110-240V)

Remote Control

1. 1. Mute button: turn on or off the sound output of the projector.
2. 2. Zoom keys: the screen will display the switch to 16: 9/4: 3 or zoom mode.
3. 3. Power button: Switch standby or working status of the projector.
4. 4/5. Flip key: images Flip / upside down.
5. 6. Energy saving mode: listen separately (only sound in this mode).
6. 7/10. volume keys: volume up / volume down.
7. 8/9/11/12. Playback button: fast forward / rewind / previous / next track.
8. 13. Play Pause button
9. 14/16/18/20. arrow keys: Menu mode parameter is used to adjust the projector.
10. 15. Signal selection key: Switch the input signal source
11. 17. OK button to confirm
12. 19. Menu key: call up or exit the projector’s main menu
13. 21. Exit function key
14. 22. image mode fast bond
15. 23. Music mode shortcuts
16. 24. Freeze: When playing video, press this button to freeze the screen
    Note: No.2, No.22, No.23, No.24 button can only work under AV/HDMI/PC- RGEs input signal source

Power

1. Plug the power cord into a power outlet.
2. Press the button “ ” on the projector or on the remote control.
   

Keystone Correction

In different angel you put the projector, the projection will Deformation like trapezoid, use the keystone correction to make it correctly.

Note: please refer to the product appearance, this figure is for reference only.

Image focus

Let projector be perpendicular to wall, with the Focusing button to make the picture clear. When focusing, you can broadcasting programs to help you finish focus.

Connecting

1. Signal source selection
   Press the projector front or the remote control signal source key *5′, enter the signal source menu interface. Use the direction key and the confirmation key to select the signal source.

2. HDMI or VGA equipment connecting

3. VGA and HDMI interface can be connected with the computer and other with VGA HDMI output interface device.

4. Choose the media signal channel : “HDMI” or “PC-RGES”
   Add: Different brand laptop output keys are as follows:Lenovo| Fn+F3
   ---|---
   Dell| Fn+F8
   HP| Fn+F4
   ThinkPad| Fn+F7
   Asus| Fn+F8
   Acer| Fn+F5
   Samsung| Fn+F4
   Sony| Fn+F7
   Fujitsu| Fn+F10
   Haier| Fn+F3
   NEC| Fn+F3
   Panasonic| Fn+F3
   Sharp| Fn+F5
   Hitachi| Fn+F7
   TOSHIBA| Fn+F5

The user of windows 7 or over win- dows7.Simply press the +P, select “copy” to connect. If the operation above is invalid, Please update computer graphics driver.

3.  **AV video equipment connecting**
  1. Use the 3in ‘video tieline comes with projector to connect with AV.
  2. Choose the media signal channel :” AV” .
4.  **3.5mm audio equipment connecting.**  

Support 3.5mm earphones and other cable sound equipment.

Maintenance and Simple Troubleshooting of Projector

Smart projector is a high-tech product integrating precision optics, electronics and machinery. The improper maintenance of the projector during the daily use will affect its service life and effects.

For the maintenance, important attention shall be paid to:

1. Dust prevention: Excessive dust will affect the heat dissipation of the projector due to environmental impact. It is suggested to clean its dust filter for one and half months according to the actual environment.
2. Ventilation: As the projector integrates the sound & photo-electricity, the optical source will produce heat during its operation. Therefore, during the installation and use, it shall be ensured that no objects around will block the air inlet and outlet of the projector as the heat dissipation depends on cold air convection to improve it working stability and service life.
3. Lens maintenance: Lens, as the core component of the projector, is directly related to the picture definition and effect. The excessive dust thereon will affect image quality. The dirty lens shall be wiped with soft cotton cloth for the glass lens surface. Hard cloth or abrasives shall not be used.
4. Cleaning: Excessive dust on the projector surface shall be cleaned in a timely manner, as it will affect the heat dissipation.
5. Moisture protection: The projector is vulnerable to the damp air. Its operating humidity is about 45%-60%. The too damp air will affect its working stability.
6. Vibration prevention: The projector shall be strictly protected from strong impact, extrusion and vibration. Try not to move and knock the projector during its normal operation, which will cause the internal circuit faults.
7. The projector shall not be installed on the unstable, shaking and uneven desk.
8. The container with liquid shall not be placed on the projector.
9. The power shall be switched off or the power cord shall be unplugged when not in use.

WARRANTY CERTIFICATE

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>