Kensington Windows 11 VeriMark Guard User Guide

Kensington Windows 11 VeriMark Guard

INSTALLATION

1. Click on Start on the taskbar and click on Settings
2. Click on Accounts to show sign-in options.
3. Click on the Sign-in options
4. Alternatively, you can click on the magnifier glass on the taskbar and search for “Set up security key”
5. Click on Security Key and Manage
6. Under Manage touch the USB dongle to access features
7. If it is the first time using a security key, you need to add a security PIN. Click on add under Security Key
8. Enter a security key PIN then click OK for the next step
9. Once PIN has been entered Set Up fingerprint on the following window
10. Enter the PIN previously set up and click OK to proceed
11. Touch the fingerprint sensor area repeatedly
12. Enter the PIN previously set up and click OK to proceed
13. Click Done to finish fingerprint enrollment or Add another finger to set up another fingerprint
14. On the main window, you can also add another fingerprint or remove the fingerprint as well as change the PIN
15. To reset the USB dongle and erase all the fingerprints click on Reset Security Key
16. Click proceed and follow the instructions to reset the USB dongle
17. Disconnect and reconnect the USB dongle
18. Touch the security key twice
19. Click done to finish reset

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>