WAGAN TECH 8590 Solar + LED Floodlight 2000 User Manual

June 6, 2024
WAGAN TECH

WAGAN TECH 8590 Solar + LED Floodlight 2000 User Manual
WAGAN TECH 8590 Solar + LED Floodlight 2000

We are constantly improving our products so specifications are subject to change without notice. Visit our website for the latest product information.

Thank you for purchasing the Solar + LED Floodlight 2000 with Remote Control by Wagan Tech®. With normal care and proper treatment, it will provide years of reliable service. Please read all operating instructions carefully before use.

Overview

Overview

  1. Solar panel
  2. Light panel
  3. PIR detector
  4. Indicator LED (inside dome)
  5. Activation button
  6. Mounting plate
  7. Remote control
  8. U-bolt
  9. M6 big flat washer
  10. M6 spring washer
  11. M6 nut
  12. Expansion bolt

SPECIFICATIONS

Solar panel 6.5W, 10 year life span
Battery 37.0 Wh, 3.7V, Li-ion
LED count 60
Brightness (Lumens) Up to 2000 lm
Recharge time 10 hours bright sunlight
Lighting time Up to 10 nights (Dim lighting mode)
PIR sensor 16–26 ft (5~8 m), 120°
Waterproof IP65
Install height 8–11 ft (2.5~3.5 m)
Materials Poly-carbonate
Size 15.0 × 9.7 × 5.5 inches
Working temperature 32–113 °F (0–45 °C)
Warranty 1 year

FEATURES

  • Flexible installation: pole or wall mounted.
    Wide area lighting

  • Remote control can choose lighting time and brightness.

APPLICATIONS

Suitable for outdoor wall or pole installation in plazas, parks, gardens, courtyards, streets, walkways, pathways, campuses, airfields, farms, and perimeter security.

ATTACHING MOUNTING PLATE

  1. Align mounting bracket to holes on rear of light.
  2. Attach securely with supplied screws.

INITIAL ACTIVATION

Activate the light by pressing the button on the underside of the light for 3 seconds. To deactivate, press and hold the button for 3 seconds. Otherwise, use the remote control to switch it on or off.

DEVICE INSTALLATION

Pole installation

As the below image shows: Take out the bolts and washers from the accessories bag for pole installation and attach the light to the pole with the U-bolts.

Wall installation

Drill 4 holes in the wall that match the holes in the mounting plate and insert the expansion bolts. Place the washers on the bolt as indicated and tighten the nuts to secure the light to the wall.

Please install the solar light in a place without any shade and facing direct sunlight for better charging.

DEFAULT OPERATION

By default the light is off during the day and comes on automatically at night. Without programming, it operates in motion detection mode M1 (described later).

REMOTE CONTROL

The remote control uses 2 AAA batteries (not included)

PROGRAMMING THE LIGHT WITH THE REMOTE CONTROL

On/Off

ON: Turns on the light. When the light is turned on for the first time, the default lighting mode is motion detection mode M1 .
OFF: Turns off the light and saves the last lighting mode.
If the light is manually turned off one night, it will not come on the next night automatically. The ON button will need to be pressed in order for the light to come on.

There are 2 main modes the light can be operated in:
Motion Detection & Timer mode.

Motion Detection

Table

30 seconds after motion ceases, the light will dim to standby level

The light automatically turns on at sunset and turns off at dawn.

Timer Mode

To temporarily override the motion detection mode, press the T button on the remote control. When in this mode, the light will run at 100% brightness for 1 or 2 hours and then return to the last programmed mode (M1, M2 or M3).

  Brightness Short Press “T” Button Indicator LED**
1 hour 100% once red flash
2 hours 100% twice green flash

LED flashes for 5 seconds

BATTERY CAPACITY INDICATOR

Green >70%
Orange 30%-70%
Red <30%

A.L.T. (ADAPTIVE LIGHT TECHNOLOGY)

Adaptive Lighting Technology uses smart battery optimization during cloudy days to extend the runtime up to 10 nights. When the battery charge gets low, such as when the days are cloudy and charging is not optimal, the light output may decrease slightly to extend runtime.

MEMORY

The light will remember the last button/program pressed and revert to that setting the following nights until a new program is set.

SPECIAL NOTE

  • Please allow solar panel to charge in bright sunlight for over 5 hours before first use.
  • If the sunlight is not strong enough, it may take longer to fully charge the light. This is normal for solar products.

WARNINGS

  • Keep the device away from fire and oil in order to avoid any explosion hazards.
  • Avoid severe shock or impact.
  • No one except professional technicians should attempt to disassemble the light in order to avoid damaging the light.

PACKAGE INCLUDES

  • Floodlight
  • Remote control
  • Mounting plate with screws
  • 2 × U-bolts with nuts and washers
  • 4 × Expansion Bolts with nuts and washers

WAGAN Corp. Limited Warranty

The WAGAN Corporation warranty is limited to products sold only in the United States.

Warranty Duration:

Product is warranted to the original purchaser for a period of one (1) year from the original purchase date, to be free of defects in material and workmanship. WAGAN Corporation disclaims any liability for consequential damages. In no event will WAGAN Corporation be responsible for any amount of damages beyond the amount paid for the product at retail.

Warranty Performance:

During the warranty period, a product with a defect will be replaced with a
comparable model when the product is returned to WAGAN Corporation with an original store receipt. WAGAN Corporation will, at its discretion, replace or repair the defective part. The replacement product will be warranted for the balance of the original warranty period. This warranty does not extend to any units which have been used in violation of written instructions furnished.

Warranty Disclaimers:

This warranty is in lieu of all warranties expressed or implied and no representative or person is authorized to assume any other liability in connection with the sale of our products. There shall be no claims for defects or failure of performance or product failure under any theory of tort, contract or commercial law including,but not limited to negligence, gross negligence, strict liability, breach of warranty, and breach of contract.

Returns:

WAGAN Corporation is not responsible for any item(s) returned without an official Return Authorization number (RA#). Please contact our customer service team by phone or email to obtain an RA#. You can also visit our website and chat with our team during our normal business hours. For more details and instructions on how to process a warranty claim, please read the “Returns” section under the “Contact” page on our website. WAGAN Corporation is not responsible for any shipping charges incurred in returning the item(s) back to the company for repair or replacement.

Register your product online at http://tinyurl.com/wagan-registration to be added to our email list. You will receive previews on our upcoming products, promotions, and events.

31088 San Clemente Street
Hayward, CA 94544, U.S.A.

Tel: +1.510.471.9221
U.S. & Canada Toll Free: +1.800.231.5806
[email protected]
www.wagan.com

©2021 Wagan Corporation. All Rights Reserved
Wagan Tech and wagan.com are trademarks of Wagan Corporation

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

WAGAN TECH User Manuals

Related Manuals