LD143 4 Porty Peas Hub User Manual
- October 27, 2023
- LD143 4 Porty Peas Hub
Table of Contents
LD143 4 Porty Peas Hub
PRODUCT OVERVIEW
- 2x USB-A ports
- 2x USB-C ports
- 1x USB-A male connector
FEATURES
- Hub with two USB-A ports, two USB-C ports and an integrated USB-A cable
- High-Sp&ed Data Transfer
- Connect various devices (Mrd disk, mouse, keyt>oard, smartphone, etc.) to your laptop via the hub
- Can charge up to 4 mobile devices e.t th& same time
OPERATING INSTRUCTIONS
DATA TRANSFER
- Plug the USB-A male connector to a computer. No driver installation needed.
- When the connection is successful, plug in any USB-A (max. 2) or USB-C (max .2) device to one of the 4 USB ports to proceed with the data transmission.
- 4 ports can be used at once.
- To remove the USB hub, simply unplug the USB connector from the computer
CHARGING YOUR MOBILE DEVICE
- Plug the USB-A male connector to a computer or any 5V power adapter.
- Plug a USB-A or/and a USB-C cabk3 and into the IJSB-A or USB-C port of your Peas Hub 2.
- Plug the other end on your mobile device
Note : The Peas Hub 2 can charge up to 4 mobile devices:. al Iha same time. In order not to street the power and charging time, we recommend charging up to 2 devices at tM same titr/6. If }’Oil charge mom than 2 mobile devices at the same time, this will slow down the output power and the charging time will be longer.
PRODUCT SPECIFICATIONS
- Material : Silicone rubber
- Dimension: 0 3,2 x 22,8 cm
- Cable length : 40 cm
- Weight 145 g
- Interface: USB 2.0, compatible 1 .1
- Maxlmllil Dela Transfer Rate : 480 Mbps
- Input port: 5V-2A.
- Output port : SV–0, SA
- USB port: 2x USB-C ports – 2x USB-A ports
- USB connector: 1x USB-A I USB 2.0 A connector
- OS compatibility: OS Independent; No additional drivers or software required
- Operating temperature: -10″C to so•c
- Warranty. 1-year international warranty
EUROPEAN UNION CE DIRECTIVE
- LEXON hereby desires that this device I& In compliance with the essential requirements and other relevant provisions of the directives 2014/30/EU & 201 1/65/EU,
- The original EU declaration of conformity may be found at: https://www.lexon-design.com/assets/certifications-ce-peashub2.pdt
- LEXON declare que eel eppareil est oonforme aux exigencies eS&entielles et aux autres disposition& pertinente6 de la directives 2014130/EU & 201 1165/EU.
- The original EU declaration of conformity may be found at
https://lwww.lexon-design.com/a66&ts/certifications-ce- peashub2.JXff
UK Conformity Assessment
The object of the declaration described above is in conformity” with the
relevant Union harmonization legislation:
The original UK declaration of conformity may be found at:
https://www.lexon-design.oom/ai5S81:s/certifications-ukca-peashub2.fXff
DISPOSAL AND RECYCLING INFORMATION
After the implementation of the European Directive 201’2119/EU in the national
legal system, the following applies : electrical and electronic devices may
not be dis-posed of with domestic waste.
Consumers are obliged by law to return electrical and electronic devices at
the end of their service lives to the public collecting points set up for this
purpose or point of sale. Details of this are defined by the national law of
the respective country. This symbol on the product. the instruction manual or
the package indicates that a product Is subject to these regulations. By
recycling, reusing materials or other forms of utilizing old devices, you are
making an important contribution to protecting our environment.
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cau&e hamiful Interference, and
- this device must accept any interference received, inducing interferene& that may cause unde6ired operation.
Notice :
Arly changes or modifications not exp1″9SSly approved by the party responsible
for compliance oould void your authority tc operate the equipment
NOTE : ThtS equipment has been les1ed end found lo comply with the limit5
for a Clas6 B digital device, pursuant to part 1 5 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation
This equipment generates, uses and can radiate radio frequency energy and. if not installed and used in accordance with the instructions, may cause harmful interferencr:, to radio communications. However, there is no guarantee that inlerlerence will not occur in a particular installation. If thi5 equipment does cause harmful interterence to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the rec9iver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ lV technician for help.
Canadian Compliance Statement
This device complies with Industry Canada license-exempt RSSs . Operation is subjsct to the following two conditions:
- This device may not cause interterence. and
- This device must accept any interference, including
Interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-003.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>