sengled E1FN9G Smart LED Filament Candle User Guide
- June 6, 2024
- Sengled
Table of Contents
E1FN9G Smart LED Filament Candle
User Guide
Sengled Smart LED Bulbs
- Soft White A19 Bulbs
- Daylight A19 Bulbs
- Extra Bright Soft White A19 Bulbs
- Extra Bright Daylight A19 Bulbs
- Soft White BR30 Bulbs
- Multicolor A19 Bulbs
- Multicolor BR30 Bulbs
- Multicolor B11 Candle Bulb
- Vintage Edison ST19 Bulb
- Sengled Smart LED filament candle
Introduction:
Sengled Smart LED bulbs offer an easy solution to having app-controllable
smart lighting in your home. These bulbs enable you to control your lights in
multiple ways–on/off, dimming, schedules, etc.– through the Sengled Home app
on your phones or through partner programs like Amazon Alexa, Google Assistant
or Apple HomeKit (Sengled smart hub E39-G8C required).
Note: A hub is required to control these bulbs.
Important Safety Information:
Before installing the Sengled Smart LED bulbs, please read and follow all precautions, including:
- Turn off power before installation or removal. Discontinue use if damaged.
- Warning: risk of electric shock. Do not attempt to disassemble the bulb.
- Not suitable for use with wall dimmers.
- Suitable for use in operating environment between -4°F and 104°F (-20°C and 40°C).
- Not for use in emergency lighting.
- Indoor use only.
Wireless Specification
- Operating channels Zigbee: 11-26
- Wireless Frequency Range: 2.4GHz (2405MHz~2480MHz, IEEE 802.15.4)
- Maximum Transmitted Output Power: +10.5dBm
Installation Instructions:
The following instructions are applicable to adding your Smart LED bulb to a
Sengled Smart Hub. If you DO NOT have Sengled Smart Hub and Sengled Home app
previously installed, please install your hub according to its user guide in
the package before installing bulbs. If you have third-party hubs, such as
SmartThings or Amazon Echo Plus, you also can connect Sengled Smart bulbs to
these hubs according to their instructions in apps. If you would like to find
our latest list of supported third-party hubs, please refer to
support.sengled.com.
Note: Please make sure your mobile device and Sengled Smart Hub are
connected to the same router.
-
Open the Sengled Home app. Go to Devices, select the + sign, and choose Smart LEDs and Accessories (Use with Hub).
Follow in-app instructions to finish the installation. -
Ensure your Sengled Home app can discover the bulbs. If the app could not discover the bulbs, please use “Add Device Manually” option (QR code scan method). If it still doesn’t work, please refer to the next section “Reset Instructions” for how to reset your bulb before attempting to add it back in.
Congratulations on successfully set up your smart bulbs!
Reset Instructions:
To reset your Smart LED bulb, ensure that the bulb is on and then quickly turn the bulb off and on at least 10 times (using a light switch or power bar works best). If the reset is successful, the bulb will flash five times. If it does not flash five times, you will have to try again. Once successfully reset, please try to pair it in your Sengled Home app again.
Operation:
The following section outlines some of the popular operational modes of the
Sengled Smart LED bulbs.
Applicable to all smart LED bulbs:
On / Off
- Smart LED bulbs can be controlled through a variety of means:
- Manually via a wall switch
- Through the Sengled Home app (including Widget)
- Through partner programs like Alexa, Google Assistant, HomeKit, etc.
- Through Sengled Smart Light Switch
Dimming
- Smart LED bulbs can be dimmed through the following
- Through the Sengled Home app (including Widget)
- Through partner programs like Alexa, Google Assistant, HomeKit, etc.
- Through Sengled Smart Light Switch
Note: Manual dimming via wall dimmers is not supported.
Scheduling
Schedules can be created with the Sengled Home app.
Check the in-app how-to pages through “Settings” for the following two
operations.
Third-Party Voice Control
- Set up Amazon Alexa by adding Sengled Home Skill.
- Set up Google Assistant by adding Sengled Home Service.
- Setup Apple HomeKit by “Add Accessory” from iOS Home app. (Sengled smart hub E39-G8C required)
If you have Sengled Smart LED Multicolor bulbs, the following operations are
also available:
Tuning Whites
Adjust whites via the white palette in the Sengled Home app, or with voice
control.
Changing Colors
Change between 16 million colors using the color palette in the Sengled Home
app, or with voice control.
Frequently Asked Questions:
1. Are Sengled Smart LEDs suitable for use with wall
dimmers? No, Sengled Smart LEDs are not suitable for use with wall dimmers, or
other variable power devices. Dimming is supported via the Sengled Home app or
compatible smart devices only.
2. Sengled Smart LED bulbs appear offline or unresponsive, what should I
do?
a) Please check the light switch and make sure that it’s switched On.
b) Refresh the status of your Sengled Home app, navigate to the Home tab,
swipe down and then release.
c) Check the status of your smart hub; make sure the LED indicator lights are
on properly. If the Power LED is off, please check the power adapter; If the
Ethernet LED is off, please check the Ethernet cable connection.
3. Can different types of Sengled smart devices be used simultaneously?
Yes, a single Sengled hub can support up to 64 Sengled smart devices,
including smart LED bulbs, smart plugs, smart sensors, smart light switches,
etc. For the latest selection, please check out Sengled.com.
Limited Warranty:
3-year limited warranty from original purchase date. Sengled restrict warranty
service for a smart home devices to the country where Sengled or its
authorized retailer originally sold the device. To learn more about the
Limited Warranty for Sengled products, please
visitsupport.sengled.com.
For FCC and IC Statement details, reference
www.sengled.com/fcc.
Support:
If you encounter any issues, please reach out to your local Sengled Support
team.
Visit the following website for web support: https://support.sengled.com/
Send emails to:
Support@sengled.zendesk.com (USA)
SengledCanada@sengled.zendesk.com
(CA)
Dial Customer Support Line
1-877-401-5990 10:00am-8:00 pm CST on
Mon-Fri 11:00am-8:00 pm CST on Sat
FCC Statement
Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment. This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful
interference. (2) This device must accept any interference received, including
interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator & your body.
ISED RSS Warning/ISED RF Exposure Statement
ISED RSS Warning:
This device complies with Innovation, Science and Economic Development Canada
licence-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired
operation of the device.
ISED RF exposure statement:
This equipment complies with ISED radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator& your body. This transmitter
must not be co-located or operating in conjunction with any other antenna or
transmitter. Le rayonnement de la classe b repecte ISED fixaient un
environnement non contrôlés.Installation et mise en oeuvre de ce matériel
devrait avec échangeur distance minimale entre 20 cm ton corps.Lanceurs ou ne
peuvent pas coexister cette antenne ou capteurs avec d’autres.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>