eufy Backup Battery for HomeBase 2 User Guide
- June 6, 2024
- Eufy
Table of Contents
eufy Backup Battery for HomeBase 2
INSTALLING BACKUP BATTERY
- Place your HomeBase 2 on the top of the Backup Battery.
- Unplug the power adapter from your HomeBase 2’s power port, and plug it into the Backup Battery.
- Connect the cable of the Backup Battery to your HomeBase 2’s power port.
| Backup Battery Status LED | Description |
|---|---|
| Blue | Working properly |
| Flashing blue | Charging |
| Red | Not connected to power |
| Flashing red | Low battery |
NOTICE
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables
to maintain compliance with FCC regulations. The following importer is the
responsible party.
Company Name: POWER MOBILE LIFE, LLC
Address: 10900 NE 8TH ST, STE 501, BELLEVUE, WA 98004
Telephone: 1-800-988-7973
IC Statement
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
This product complies with the radio interference requirements of the European Community.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this device is in compliance
with the essential requirements and other relevant provisions of Directive
2014/53/EU. For the declaration of conformity, visit
https://uk.eufylife.com/
This product can be used across EU member states. Due to the used enclosure
material, this product should only be connected to a USB interface of version
2.0 or higher. The adapter shall be installed near the equipment and shall be
easily accessible. Do not use this device in the environment in extreme hot or
cold temperatures. Never expose this device to strong sunshine or a moist
environment. The recommended operating temperature range for T8732 and
accessories is
-10°C-45°C.
When charging, please place the device in an environment that has a normal
room temperature and good ventilation.
It is recommended to charge the device in an environment with a temperature
that ranges from 5°C-25°C. Use only the charger offered by the manufacturer.
Using an unauthorized charger may be unsafe and violate any warranties.
This charger is for indoor use only. The charger type is ASSA67W-120200
/KA2401A-1202000DE, and the output voltage/current is 12Vdc/2A. The plug is
considered to be a disconnected device.
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF
RF exposure information: The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with the RF exposure requirement, use this product while maintaining a 20cm distance between the device and human body. The following importer is the responsible party (contact for EU matters only)Anker Innovations Deutschland GmbH I Georg-Muche-Strasse 3, 80807 Munich, Germany
- This product is designed and manufactured with high quality materials and components, which can be recycled and reused.
- This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.
- This product complies with the radio interference requirements of the United Kingdom.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this product is in compliance
with Radio Equipment Regulations 2017. The full text of the UK declaration of
conformity is available at the following internet address:
https://uk.eufylife.com.
Anker Technology (UK) Ltd I Suite B, Fairgate House, 205 Kings Road, Tyseley,
Birmingham, B11 2AA, United Kingdom
References
- eufy - Built with Care | Home Security System & Robovacs | eufy UK
- eufy - Built with Care | Home Security System & Robovacs | eufy UK
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>