UBOX-TS-SK4G-WiFi-Solar-Battery-Camera-LOGO User Guide

UBOX-TS-SK4G-WiFi-Solar-Battery-Camera-LOGO

APP INSTALLATION

(1.) Scan the following QR codes or seach for ‘UBox’ from the App Store(for iOS devices) or Google Play Store (for Android smartphones) to download and install the app.

APP REGISTRATION

1.  Open the app then input your E-mail address then press ‘Register’. Check and select to agree the agreement then your E-mail box will get a verification mail. ( For better user experience, please allow to open all permissions to avoid missing any notifications from the app.)
2.  Set the login password and confirm the login password. Then press ‘Register’ to next step. (For your password safety, the password requires more than 8 characters plus a combination of letters)
3. We send a verification mail to you, go to your mailbox click the link to complete the verification.
4. Enter your E-mail address, and password, click login . (APP will auto fill the account information)

 WI-Fl CONNECTION

1.  Press ‘Add Family’ then set the room or position as per reminders.
2.  Enter your family name and then press ‘Next’.
3. Input the necessary information just like Country, Province, then press ‘Done’
4.  Press ‘Add a device’ to add a smart device
5.  Connect the device with power supply, and make sure your mobile phone is connected to an available Wi-Fi. Then press ‘Setup device’.
6.  After the power on the device, wait for the device bule LED are blinking Which means your device in pairing mode
7.  If the device blue are not blinking, please press the power/Call key to wake up the device first, then hold and press the RESET button until the blue indicator to light up and then release. The device will reboot and enter the pairing state.
8.  Set the device name and select the
9.  The app will input the Wi-Fi name automatically, please input the correct Wi-Fi Password. Then you can choose the ‘QR code configuration’ or ‘Sound wave configuration’ .
10.  QR code configuration: Select the QR code configuration then the mobile phone display a QR code. Use the device to scan to the QR code 10cm away from the mobile phone.
11.  The device will enter to the device list automatically. Setup success! The device is ready to use.
12. *Notes about PIR detection users can change the PIR detection sensitivity in device settings.we recommend to set sensitivity  Disabled: disabled PIR detection.  Low: deleay 7 seconds PIR detects a moving.
    Medium: delay Seconds PIR detects a moving. High: delay 1 second PIR detects a moving. @ctionsonsltivily **

 USING THE APP

DEVICE LIST

Choose the desired date to check all videos from the cloud.

SPECIAL NOTES

1.  The device is equipped with a rechargeable lithium battery. The battery life will be affected by the device’s wake-up time and the number of wake-ups. therefore, the PIR sensor alarm detection function is used in an environment with a lot of people. It is recommended to turn off or set the device to low sensitivity to reduce device wake-up and call times extend battery life. When the battery is low, please charge the battery immediately.
2.  Keep the device in the range of your router. Make sure the device is placed close to the Wi-Fi router. If there has to be thick or insulated objects between the device and the Wi-Fi router, which may lead to a weak Wi-Fi signal, please make sure the Wi-Fi signal is in a good level before you start using the device.
3.  It is a delicate device with a low power consumption design. Every time the device is awakened and will work for a few seconds. After that, the device will enter standby mode to save power. You can set the work time in the app settings.
4.  Because mainland China does not receive Google’s system push messages, you need to open the app’s self-starting function in your phone to receive push messages.
5.  This device provides one month of free cloud storage and faces recognition services. If you need to continue using value-added services after the trial period expires, you need to purchase them
   in the app.

PRODUCT DESCRIPTION

1. LIGHT SENSOR
2. IMAGE LENS
3. LED INDICATOR
4. PIR
5. SIM CARD
6. CHARGE TYPE-C
7. IR LED
8. SPEAK
9. RESET
10. MIC
11. TF CARD
12. POWER ON/OFF

WHAT’S IN THE BOX

• Instruction Book
• Battery Camera
• Type-( Charging cable Holder
• Screw fittings
• Solar panel (Optional)

 LIMITED WARRANTY

Our company is committed to strict accordance with the national warranty certificate for the products and offers a 7 day return, 15-day replacement, and 1-year warranty service (subject to the purchase receipt). The user is required to provide a valid purchase receipt or invoice when enjoying the warranty service. While, if the damage is caused by man-made or disassemble itself, users can not enjoy our warranty service. This please understand.
The phone number for the product and after-sales service:

Product Warranty Card

• User data
• Your name: __ Your phone number: Your email: __ Your address: __ _
• Product information
• Product name: Product model: __ Purchase date: Purchasing channel:
• Sales information
• Sales unit: __ Contact number: __ Sales date: ____ (Sales unit seal): ____
• Note: This section is for the customer·s certificate. Please make sure that it is completed and properly kept as proof of warranty service.
• User maintenance records

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>