JLAB HBJPRORPNK4 JBuddies Pro Wireless Over-Ear Kids Headphone User Guide
- June 6, 2024
- JLab
Table of Contents
HBJPRORPNK4 JBuddies Pro Wireless Over-Ear Kids Headphone
User Guide
FREE GIFT
when you register this product jlab.com/register Product updates I How-to tips
I FAQs & more
– Gift for us only No APO/FPOIDPO addresses
3 MONTHS FREE
With purchase. Visit jlab.com/tidal
Shop products I Product alerts I Burn-in your headphones
US Compliance
FCC Information
FCC ID: 2AHYVJBUDDIESP This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
If you cannot eliminate the interference, the FCC requires that you stop using your product. Changes or modifications not expressly by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
EU Compliance
PEAGLLC ba JLab Audio hereby 0declares that this device is in 0oripllance
with the essential requirements and other relevant provisions of the RED
directive
A copy of the EU Declaration of Conformity is available at
lab.com/compliance
JLab Audio
2281Las Palmas Drive, Suite 101, Carlsbad, CA 92011, USA
The symbol above indicates that this product an/or battery should not be disposed of with household waste. When you decide to dispose of this product and/or its battery, 0do so in a00ordianoe with local environmental laws and guidelines
Battery Caution & Disposal Information
Please take care of your battery. Do not; disassemble, burn, puncture, crush
or bend your battery improper operation ot the battery may produce smoke.
In such an event, ventilate the
area Extinguish flares with carbon dioxide, dry-powder fire extinguisher, or
cover with sand or mud. Take care to avoid conditions of excessive moisture
for prolonged periods and do not immerse. Do not expose to temperatures above
50C/122F Charge battery fully before storage or if stored for longer than
three months
Disposal
At the end of #ts lite, please take care to dispose of this product
responsibly Electronic products and batteries contain materials that can be
harmful to the environment. Please do not dispose to unsorted waste. Take your
electronic waste to a designated collection or recycling facility to be
recycled properly. Your local council authority will be able to tell you where
your nearest facilities are. There may be one at your local supermarket.
Juab can help you recycle. Learn more
jlab.com/recycle
Contact Us
If you’re unsatisfied with your purchase, please contact us and we’ll care for
you! You can contact our US-based customer support team:
Website: jlab.com/contact
Email: support@jab.com
Phone U.S.: +1 405-445-7219 (Check
hours jlab.com/hours)
Phone U.K.: +44 (20) 8142 9361 (Check hours
jlab.com/hours)
Visit jab.com/warranty to initiate a return or
exchange
Visit jlab.com/safety to learn how to safely use, including the proper tip installation.
Our team is constantly improving your product experience. This model may have new features or controls which are not detailed in this guide. For the latest version of the manual, please visit www.jlab.com/manuals
QUICKSTART GUIDE
For full User Manual
+ other Jlab products visit JLAB.COM
OFFICIAL AUDIO PARTNER OF MAJOR LEAGUE SOCCER
#FINDYOURGO
CONTROLS
BLUETOOTH PAIRING:
When power is off, PRESS & HOLD 10 SECONDS
(Blue and red flashing lights will indicate buddies Pro are ready to pair to
Bluetooth device)
POWER ON / OFF: PRESS & HOLD 3 SECONDS
(Slow blinking blue light indicates power is on)
PLAY/ PAUSE / ANSWER / HANG UP CALLS: 1 CLICK
ACTIVATE SIRI (OS) OR OK GOOGLE” (ANDROID] 2 CLICKS
RE-PAIRING AND ADDITIONAL DEVICES:
When power is off, PRESS & HOLD 10 SECONDS
VOLUME UP/ VOLUME DOWN: 1 CLICK
TRACK FORWARD/ TRACK BACKWARD: 2 SECOND HOLD
CHARGING
Connect the USB-C cable to the computer or USB 5V 1A (or less) output device.
SHARE MODE
Connect the included AUX CABLE to either side to another JBuddies Pro or any other wired headphone/earbud for Share Mode.
GO WIRED
Connect the AUX CABLE to a device for a wired connection.
BLUETOOTH PAIRING:
When powered on, Bluetooth Headphone will automatically go into pairing mode.
Fast blinking red & blue light indicates searching for a Bluetooth device.
Search for JLab JBuddies Pro BT on your Bluetooth device.
RE-PAIRING AND ADDITIONAL DEVICES:
When powered off. press and hold the power button for 8 seconds.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Product Name: JBuddies Pro Wireless
Model: JBuddies Pro Wireless
Brand: JLab
Basic Information of Manufacturer
Company: PEAG, LLC dba JL.ab Audio
Address: 2281 Las Palmas Drive, Suite 101,Carlsbad, CA 92011, USA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>