MEILAN M3 Mini GPS Wireless Bike Computer Instruction Manual

June 6, 2024
MEILAN

MEILAN M3 Mini GPS Wireless Bike Computer

MEILAN-M3-Mini-GPS-Wireless Bike-Computer-product
Introduction

M3 is a simple bike computer with mini and delicate appearance. Equipped with GPS technology, which can display the basic riding data such as current time, speed, riding time, distance, total mileage, altitude and etc.

Screen Display


Icon description

| Icon| Description|
---|---|---|---
KM/H| Metric unit|
AVG| Average|
MAX| Maximum|
TM| Time (active time): Moving time|
Icon| Description| DST| Current distance|
ALTI| Current altitude|
| History review mode|


TOT

| Total time is the duration from the moment you start on the M3 to the moment you finish the workout (including auto pause featureor).|
****| Pace arrows Indicates whether the

current speed is faster (   ) or slower (   ) than the average speed.

|
MPH| Imperial unit| ODO| Total distance|

GPS and Backlight

GPS signal
 Please make sure your M3 is used at open space and barrier-free area

  •  Turn on M3.

  •  GPS positioning

  • GPS positioning may take 2 minutes or even a longer time when it is turned on for the first time or after a long period of non-use.

    • It’s searching for GPS when LED indicator light is slow blinking.
    • When the LED indicator light stays on with full brightness and it reminds the”Beep”sound at the same time, the GPS positioning succeeds. You can start to ride After 30seconds,the LED light will turn off; it will blink one time per minute later to remind the power status for user.
    •  After GPS positioning is successful, the time is automatically synchronized with the local time via GPS.
    • After the GPS positioning is successful and the M3 works for a few minutes, the altitude will be automatically calculated by GPS.

Backlight
Manual full screen backlight Short press the left top button and the right top button at the same time to turn on/off the backlight.

Description of the Device and Accessories

Computer

(POWER) button
Turns the power on and off, Switch display of speed data; Change data in settings mode

Smart (right top) button
Switch display of data menu; Confirm and go to the next in settings mode; Save the cycle data and exit or enter history.

SETTING button
Accesses the Settings menu or save the Setting; Delete saved data in history view

Accessories
MEILAN-M3-Mini-GPS-Wireless Bike-Computer-fig3
Setting up the M3

Operation of buttons

Setting Button
Located above the of the device, this button accesses the settings menu if pressed when the device is on, then please press again to save if you have completed the setting.

Smart and Power Button (left top button) :
On the left top side button of the device is the Smart and Power Button which is to change the data, or power it on or off when held for 2 seconds.

Smart Button (right top button) :
On the right top side button of the device is the Smart Button which is to confirm and scroll backwards through the functions. And after completing the last step of setting, press to save the setting.

Initial settings

Power on and get setup
Perform the following operation when you use the unit for the first time. Press and hold the left top button of M3 for 2 seconds turns on and enter the setting mode.
(If it is not the first time, press the SETTING button to go to setting menu)MEILAN-M3-Mini-GPS-Wireless Bike-Computer-fig4
Setting the time zone
Select the time zone while searching on Internet.
When the left top button is pressed, the time zone changes. After selecting the appropriate time zone, press the right button to confirm and go to the next step “Setting the sound”. The value of the data will keep blinking when you set it.

The time zones of most common cities:

Beijing UTC + 8 Tokyo UTC + 9 Bangkok UTC + 7
Sao Paulo UTC – 3 Los Angeles UTC – 8 New York UTC – 5
Moscow UTC + 3 Sydney UTC + 10 London UTC + 0
Warsaw UTC + 1 Berlin UTC + 1 San Diego UTC – 8

Setting the sound
Change the ON/OFF of device sound by pressing the left top button. Press the right top button to confirm and go ti next step setting the units of measurements

MEILAN-M3-Mini-GPS-Wireless Bike-Computer-fig6
Setting the ODO
Change the value of the ODO by pressing the left top button.Press the right top button to confirm. Until the ODO is changed.

When you have set the ODO and completed the setting by pressing the right top button or the setting button,you will enter GPS searching and measurement screen.

GPS searching
Now, setup of the M3 Mini is completed.Go to the open space and wait for the GPS signal. After the GPS signal positioning is successful, you can start to ride.MEILAN-M3-Mini-GPS-Wireless Bike-Computer-fig8 Restore Factory Settings
Long press the right top button and the SEETING button at the same time go to factory default settings menu.  All the data will be deleted when the device is reset to the factory default mode by pressing ; If you want to cancel the operation, can press

Mount up & Lock it Down

Installing the bike mount on the stem or handlebar
MEILAN-M3-Mini-GPS-Wireless Bike-Computer-fig9

  • Place the bike mount on the stem or handlebar of your bicycle with the rubber side down. (The triangle symbol in front must point in the direction of travel.)
  • Attach the bike mount securely using the two rubber bands. (Lock the mount firmly with two suitable rubber bands according to the size of the stem and handlebar.

NOTE: Two rubber bands fix the mount diagonally.

  • Place the bike computer in the mounting grooves and turn clockwise unti

 Perform a Workout

Start your workout

  • Please make sure your device is used at open space and barrier-free area1.

  • Turn on the M3 by pressing the power button for 2 seconds.

  • The device starts to search GPS signal.

  • GPS positioning

    • GPS positioning may take 2 minutes or even a longer time when it is turned on for the first time or after a long period of non-use.
  •  It’s searching for GPS when LED indicator light is flashing.

    • During a workout, the device will start and stop automatcially in sync with the movement of the bicycle.

Ending a workout

  • To end a workout, press and hold the right top button.
  • Press the left top button to select YES to confirm and save the workout record; Press the right top button to select NO not to save the workout record, it will be deleted.

History **

**

View histroy record

  •  Long press the right top button to enter or exit history view.
  •  Press the left top button quickly to check different measurement data in the record you are viewing.
  • Press the right top button quickly to scroll to the next one.

Delete the riding data

  • Long press the right top button to enter or exit history view.

  • Press the right top button quickly to scroll to the record view you want to delete

  • Then press the SETTING button on the back of M3 to delete. Just delete this record.

Battery and Charge

Input:
Micro USB DC 5V 0.5A

Power indicator

  • Red: The battery is low and needs to be recharged.
  • Yellow: 31-60% power. LED
  • Green: Sufficient battery. LED light is breathing on and off: Charging.

Please charge the battery after first use or long storage
If the battery is not used for a long time, the voltage the voltage may decrease according to the standby current. Please fully charge the battery before use.

Charging notification

  •  Please charge the device when the ambient temperature is between 5°C to 40°C.
  • After making sure it is fully charged, please remove the USB plug.
  • Please do not connect wet bike computer to the USB charging cable, there may be short ciruit which will lead to breaking.
  • The device will be off automatically without any operation up to 10minutes as to save power.

LED Indicator

For power:

Red The battery is low and needs to be recharged.
Yellow 31-60% power.
Green Sufficient battery.

For charging:
LED light is breathing on and off: Charging.

For GPS positioning:

  • Slow blink (about once every two seconds):
    • GPS is searching and positioning.
  • Stay-on brightness:
    • GPS positioning is successful and you can start riding.
  • LED off:
    • After 30 seconds, the LED light will turn off and blink one time per minute as to remind the power status for users.

Specification

  • GPS
    • High-precision GPS
  • Display
    • LCD display
  • Screen Size
    • 1.7 inch
  • Battery
    • Lithium battery
  • Battery Capacity
    • 400 mAh
  • Battery Life
    • 8 hours
  • Operation Temperature
    • -20 °C to 60 °C
  • Product Weight
    • 35g
  • Product Size
    • 604424.5 mm / 2.41.70.97 inch
  • Waterproof Grade
    • IPX5

Optional Accessories

  • C2 Dual-Sided Bike
  • Computer Mount

Safety Statement and Warranty

  • Do not throw used batteries into water or an uncontrolled natural enrironment. Do not place this product on fire or in an extremely high temperature environment.
  • When the product is not used continuously for six months, please charge itat least once, otherwise it may affect your use.
  • This product is suitable for use from light to moderate rain. Do not use the product in heavy rain or immerse it in water.
  • Riders pay too much attention to the screen when the bicycle is running at high speed or improper training will increase the risk of injury. The data generated by M3 is for reference only.
  • This product was developed in accordance with the EN300328V1.9.1 standard.Please observe the local laws and regulations when using it in different regions.
  • The product is guaranteed for one year from the date of sale for non- human damage, and the accessories are not covered by the warranty.

You can contact the after-sales service through MEILAN global distributors or by writing to MEILAN.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals