BOSCH UA22A Vehicular BLE Transceiver Instructions
- June 1, 2024
- Bosch
Table of Contents
BOSCH UA22A Vehicular BLE Transceiver
Specifications
- FCC ID: PFJUA22A
- IC: 909C-UA22A
- Compliance: Part 15 of FCC Rules and ISED Canada license-exempt RSS
- Operating Conditions: Must not cause harmful interference and must accept any received interference
- Radiation Exposure Limits: Complies with FCC and ISED limits for an uncontrolled environment
- Installation: Maintain a minimum distance of 20cm between the device and the body
Installation
- Ensure the device is placed at least 20cm away from your body.
- Do not co-locate the device and its antenna with any other transmitter or antenna.
Operation
- Ensure the device complies with Part 15 of FCC Rules and ISED Canada license-exempt RSSs.
- Avoid causing harmful interference and accept any received interference for optimal operation.
Maintenance
- Refer to the user manual for maintenance instructions and contact the manufacturer for any necessary repairs.
FAQs
- Q: What should I do if the device does not power on?
- A: Check the power source and ensure proper connections. If the issue persists, contact customer support for assistance.
- Q: Can I modify the device’s settings?
- A: Any changes or modifications not approved by the manufacturer may void your authority to operate the equipment. Refer to the user manual for guidance on settings adjustments.
INTRODUCTION
- The device under test is manufactured by the grantee (Robert Bosch Corporation) and sold as an OEM product.
- Per 47 CFR 2.909, 2.927, 2.931, 2.1033, etc…, the grantee must ensure the end-user has all applicable/appropriate operating instructions.
- When end-user instructions are required, as in the case of this product, the grantee must notify the OEM to notify the end-user.
- Robert Bosch Corporation will supply this document to the reseller/distributor dictating what must be included in the end user’s manual for the commercial product.
INFORMATION TO BE INCLUDED
INFORMATION TO BE INCLUDED IN THE END USER’S MANUAL
- The following information (in blue ) must be included in the end-product user’s manual to ensure continued FCC and Industry Canada regulatory compliance.
- The ID numbers must be included in the manual if the device label is not readily accessible to the end user.
- The compliance paragraphs below must be included in the user’s manual.
- FCC ID: PFJUA22A
- IC: 909C-UA22A
FCC
This device complies with Part 15 of the FCC Rules and with Canada license- exempt RSSs.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Note: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. The term “IC:” before the radio certification number only signifies that ISED Canada technical specifications were met.
Note: This equipment complies with FCC and ISED radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20cm normally maintained between the radiator and your body.
BOSH are Trademarks of Robert Bosch GmbH, Germany
CONTACT
- Robe rt Bos ch LLC
- 15000 Ha Haggerty Road
- P Plymouth, MI 48170
- www.bosch.us.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>