PANTONE PT-TWS008 Wireless Earphones Instruction Manual

PANTONE PT-TWS008 Wireless Earphones

Product Information

• Product Name: Wireless Earphones
• Model Number: PT-TWS008 Rev00 – 01.04.2022
• Brand: DATAplus Supplies Inc.
• Wireless Version: 5.1
• Earphone Charging Time: 1.5 hours
• Case Charging Time: 2 hours
• Earphone Battery: Lithium Polymer

Product Usage Instructions

1. Read the manual carefully before using the product and pay attention to the safety warnings.
2. Keep the manual for future reference or in case of passing the product to a third party.
3. Avoid listening at volumes that are too loud, especially for prolonged periods while using the product.
4. Do not use the product unsupervised and make sure that children do not play with the plastic wrap or remove small parts from the product and play with them.
5. If you want to reset the product, take out the earphones from the charging box and four-click the MFB of two earphones at the same time when the earphone did not connect to any devices. When the red and green lights are on, the reset is completed.
6. Only one earphone can be used for music playback or for making calls. This function (MONO) can be used with both earphones. To use this function, only take one earphone out of the charging box. If you want to switch to stereo mode, you can also remove the second earphone at any time. Vice versa if you want to switch to mode MONO, store an earphone in the charging box at any time.
7. The multifunction buttons on the earphones can be used for various purposes such as playing/pausing music, answering/ending/rejecting a call, skipping tracks, adjusting volume, and activating vocal assistance. Refer to the manual for detailed instructions on how to use these functions.
8. If the connection between the left and right earphones is lost, put both earphones back inside the charging box, close it, and wait a few seconds before reopening it. The earphones will automatically re-connect to each other. If this does not work, disconnect the earphones from your device, wait a few minutes, then reconnect them (the earphones must be placed inside the charging box). Make sure that the earphones inside the charging box are charging, so ensure that the charging box has a sufficient charge level to ensure the charging of the earphones. Refer to the reset method if necessary.
9. Do not use abrasive solvents to clean the product, do not attack the product with any kind of sharp object as it may scratch or damage the product, and keep the product away from high temperatures, dust, and humidity.

Please read this manual and pay attention to the safety warnings before using the product Keep the manual to have the possibility to consult it at a later time, or in case of passing the product to a third party. DATAplus Supplies Inc. will in no way be held responsible for injury or damage caused to persons or property resulting from improper use of the product.

Safety rules

Avoid listening at volumes that are too loud, especially for prolonged periods while using the product. If you use the product at an excessive volume, it could permanently damage your hearing. Listen at a moderate volume. Audio alerts, warnings, and environmental noises may sound different when using the product.

Be aware of how these signals differ in terms of sound so that you can recognize the signals in corresponding situations. Do not use the product while driving a motor vehicle, cycling, using machines, or in other situations where awareness of the noise in your surroundings could affect you or others. At the same time,  also observe the laws and regulations ofthe country in which you use the product. To avoid malfunction or damage to the product, avoid accidental falls, do not crush, puncture or exert a high level of pressure on the product. Keep the product away from moisture, water or other liquids. Do not store or expose the product to any heat source, direct sunlight, radiators, stoves or other heat sources such as your car dashboard in the summer. Do not attempt to modify, repair or disassemble the product.

Do not use the damaged product. Never use aggressive detergents, alcohol or other chemical solutions for cleaning as they could damage the housing or even impair the functionality of the product. Do not immerse the product in water or other liquids. There are no serviceable parts inside the product. Never open and take it apart. Keep the product out of the reach of children. Never allow children or people with disabilities to use electrical products unsupervised. Make sure that children do not play with the plastic wrap, they could swallow it and choke. Make sure that children do not remove small parts from the product and play with them.

Reload

When using for the first time, charge the battery to maximum capacity. To recharge, plug the charging cable into the product’s charging port. The flashing red light at the bottom of the charging box indicates that charging is in progress. When the red light turns constant on, the charging box is fully charged.

Once the earphones are placed inside the charging box, charging will begin and a red light will light up on each. After fully charged, the light will turn to green for 30s and then the light goes out.

Pairing

Once the case is opened, the earphones will turn on automatically. The earphones must be connected to the device within 3 minutes, otherwise they will go into power saving mode. To activate the pairing mode again, simply place the earphones in the charging case, close it and wait a few seconds before reopening it, following the above procedure again. Now activate the Bluetooth® function on the device, search for PANTONE TWS1, select it once identified and connect it. You will hear the tip sound when pairing is completed.

Automatic reconnection

Once the headset and device have been paired once, they will automatically reconnect when your device’s Bluetooth® is on and within range.

Reset:

It is possible to reset the product, the steps are as follows:

1. Take out the earphones from the charging box;
2. Four-click the MFB of two earphones at the same time when the earphone did not connect to any devices. When the red and green light are on, the reset is completed.

MONO/STEREO operation

Only one earphone can be used for music playback or for making calls. This function (MONO) can be used with both earphones. To use this function, only take one earphone out of the charging box. If you want to switch to stereo mode, you can also remove the second earphone at any time. Vice versa if you want to switch to mode MONO, store a earphone in the charging box at any time.

Multifunction buttons

Automatic shutdown

1. If connected to a device, after disconnecting the Bluetooth® connection, the headset will automatically turn off after 3 minutes.
2. If you don’t connect your phone when the red and green light flashes, the headset will automatically turn off in 3 minutes.

Pairing between left and right earphones

If the connection between the left and right earphones is lost

1. Put both earphones back inside the charging box, close it and wait a few seconds before reopening it. The earphones will automatically re-connect to each other.
2. If the process just described does not work, disconnect the earphones from your device, wait a few minutes, then reconnect them (the earphones must be placed inside the charging box). For both procedures it is necessary that the earphones inside the charging box are charging, so make sure that the charging box has a sufficient charge level to ensure the charging of the earphones.
3. Refer to the reset method.

Maintenance

1. Do not use abrasive solvents to clean the product;
2. Do not attack the product with any kind of sharp object as it may scratch or damage the product;
3. Keep the product away from high temperatures, dust and humidity.

Characteristics

• Wireless Version: 5.1
• Earphone charging time: 1.5h
• Case charging time: 2h
• Earphone Battery: Lithium Polymer 40mAh * 2 / 3.7V (0,14Wh)
• Charging box battery: Lithium Polymer 300mAh / 3.7V (1,11Wh)
• Sensitivity: 108 ± 3dB
• Frequency response: 20-20kHz
• Rated power: 3mW
• Maximum power: 5mW
• Operating range: 10m
• Playback time: 5h
• Standby time: 90 days
• Earphone size: 31.6 21.34 23.62mm
• Charging box size: 62.9 42.4 25.9mm
• Usage temperature: 0 ~ 40°C
• Single earphone weight: 3.8g
• Charging box weight: 36.5g
• Maximum radiated power: <20mW
• Frequency range: 2.402GHz – 2.480GHz

User information for proper disposal (Directive 2013/56 / EU)
The crossed-out bin symbol shown on the equipment or on its packaging indicates that the product at the end of its useful life, including the non- removable battery, must be collected separately from other waste to allow for proper treatment and recycling. The safe use of this product is guaranteed in compliance with the following instructions, therefore it is necessary to keep them and follow them scrupulously throughout the life of the product. The product does not require technical maintenance, NEVER DISASSEMBLE IT. The battery inside is integrated and not replaceable. Do not attempt to remove the built-in Lithium Ion / Polymer battery yourself as it may cause overheating, fire, and injury. The battery should only be removed by independent qualified professionals who are able to remove it safely and dispose of it in accordance with applicable laws.

The user must therefore give the equipment at the end of its life free of charge to the appropriate municipal centers for the separate collection of electrical and electronic waste, or return it to the retailer, on a one-by-one basis, or free of charge for appliances with smaller external dimensions. to 25 cm. Adequate separate collection for the subsequent sending of the decommissioned equipment for recycling, treatment and environmentally compatible disposal helps to avoid possible negative effects on the environment and health and favors the reuse and/or recycling of the materials of which it is composed the equipment. Illegal disposal of equipment, batteries, and accumulators by the user involves the application of the penalties provided for in the current legislation.

This product complies with RoHS directives 2011/65/EU and 2015/863/EU. The Product has the CE mark and therefore complies with the safety standards established by the European Union. Esprinet SpA declares that the product complies with directive 2014/53 / EU. The full text of the EU declaration of conformity is available at the following Internet address: www.celly.com/Exchange/CELLY-SPA/Dichiarazioni_di_conformita/PT- TWS008/DOC_PTTWS008.pdf.

Pantone Licensed Manufacturer
2022 © DATAplus Supplies, Inc. registered in Taiwan.
Address: 9th Floor, 279, Hsin Yi Road, Sec. 4, Taipei, Taiwan.

All products are designed by DATAplus and used under license.

Imported by Esprinet Spa via Energy Park 20 – 20871 Vimercate (MB) – Italy

Made in China.

References

• Celly.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>