SooPii V6 Aluminum Wireless Charging Stand Instruction Manual
- June 6, 2024
- SooPii
Table of Contents
Aluminum
Wireless Charging Stand
Instruction Manual
V6
LED Indicator | Status |
---|---|
Solid blue for 1 second, then off | Connected to power |
Breathing blue | Charging mobile device |
Solid blue | Fully charged mobile device |
Flashing blue | Metal objects detected |
Flashing blue | Incompatible AC adapter or cable connected |
LED Indicator Switch
Turn on/off the Breathing light while charging.
Important Note in using Wireless Charging:
- Using an ultra-thick protective phone case or a case with a magnetic/iron plate is not recommended as it may affect the wireless charging function.
- Do not place any foreign objects between your smartphone and the wireless charger’s surface, including metal pads on a car mount, credit cards, door keys, coins, metal, or NFC cards, as it may cause overheating.
- Do not connect the wireless charger to a 5V/1A wall charger or a USB port on a computer as it may affect the wireless charging function.
Important Safety Instructions
- Avoid dropping.
- Do not disassemble.
- Do not expose to liquids.
- For the safest and fastest charge, use original or certified cables.
- This product Is suitable for moderate climates only
- The maximum ambient temperature during use of this product must not exceed 407C.
- Open flame sources, such as candles, must not be placed on this product.
- Only use a dry cloth or brush to clean this product.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation Is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures: (1)
Reorient or relocate the receiving antenna. (2) Increase the separation
between the equipment and receiver. (3) Connect the equipment into an outlet
on a circuit different from that to which the receiver is connected. (4)
Consult the dealer or an experienced radio / TV technician for help.
Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for
anuncontrolled environment. This transmitter must not be co-located or
operating inconjunction with any other antenna or transmitter. During the
operation of the device, a distance of 15 cm surrounding the device and 20 cm
above the top surface of thedevice must be respected. Product Name: Wireless
Charger Stand Model: V6
IC Statement
This device complies with RSS-216 of Industry Canada. Operation is subject to
the condition that this device does not cause harmful interference.
Specifications
Input | 5V=2A/9V=2A/12V=1.5A |
---|---|
Output | 15W Max |
Size | 142 x 70 x 50mm / 5.6 x 2.8 x 2.0 in |
Weight | 247g/8.7oz |
Declaration of Conformity
Hereby, Shenzhen SooPii Technology Co., Ltd. declares that the product type V6
is in compliance with Directive 2014/53/EU.
For more information and support, lease
visit:https://facebook.com/qr?id=282745525917845
Facebook.com/Soopii.fans
support@soopii.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>