SooPii CS100 Wireless Charging Station Instruction Manual
- June 5, 2024
- SooPii
Table of Contents
Sharing Efficiency Happiness
WIRELESS
CHARGING STATION
Wireless Charging for Qi Enai Devices + AirPods + iWatch Series
Instruction Manual
CS100
PLUG & CHARGE
No need for extra Adapters, just plug the Power Cord into the socket of the Charging Station, and start to charge your devices.
Step1: Use your Powerful way to plug the Figure-8 female connector
into the socket of the Charging Station. Make sure the two white strips are
all in the Socket.
Step2: Plug the male connector of the Power Cord into a standard outlet.
PRODUCT OVERVIEW
WIDE COMPATIBILITY
5W/7.5W/1 OW/1 5W
Wireless Charging Compatible Phones:
Vertically & Horizontally Charging All Qi-Enabled Smartphones.
Note: 5W iPhone 12 Pro Max Currently only Supports
SW
Wireless Compatible with:
Charging on Horizontal Way. AirPods 2 / AirPods Pro
SMART LED CHARGING INDICATOR
Note: The LED Indicator is only indicating the wireless phone charging
area.
Blue Light is On Wireless Charging the Phone, the light is always on as
long as you put the phone on the wireless charging area.
Blue Light is flashing Non-Qi-Enabled Devices or wrong attachments are
placed on Wireless Charging area.
CHARGING THROUGH CASES
Wireless Charging Through Cases below 5mm thickness, but not accepting below kind Conditions:
TECH SPECS
Input: 100-240V AC 50/60Hz
Wireless Charging for Qi-Enabled Devices: 15W max
Wireless Charging for Airpods: 5W max USB A and USB-C
Output: 5V 2A max Total Output: 30W
WHAT YOU GET IN THE BOX
- Wireless Charging station X 1
- 1.5m Power Cord X 1
- Quick Instructions X 1
- Service Card X 1
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver, Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with a minimum distance of
20cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>