PIEGA Sub Medium Wireless Subwoofer User Guide
- June 6, 2024
- PIEGA
Table of Contents
PIEGA Sub Medium Wireless Subwoofer User Guide
THANK YOU!
And congratulations on choosing a PIEGA Sub Medium. Use this guide for a quick and easy dive into your personal sound adventure.
HOW TO GET STARTED
The PIEGA Sub Medium fits the Ace Wireless speakers from PIEGA or a WiSA transmitter. Simply follow the step-by-step instructions below to start using your PIEGA subwoofer, or refer to the comprehensive manual on our website if you require further information.
UNPACK YOUR SUBWOOFER
Make sure that the following items are included in the scope of delivery:
-
Subwoofer
-
Power cable
SET UP AND CONNECT TO POWER
Start by positioning your subwoofer and connecting it to the power supply.
Option: WIRELESS-Mode
Select your preferred mode by flipping the «WIRELESS» switch:
Choose «ON» to enable all wireless functions and connect your subwoofer wirelessly with your Ace speakers or any other WiSA transmitter.
Choose «OFF» to disable all wireless functions. Refer to the online manual for further details.
Make sure the «WIRELESS» switch is flipped to «ON» during the entire installation process.
PAIR YOUR SUBWOOFER
Our PIEGA sub medium is an ideal addition to the Ace Wireless loudspeaker series. To couple your subwoofer with a PIEGA Ace Tx, press «PAIR» on your subwoofer. The «PAIR» indicator starts to flash.
Then press «PAIR» on your Tx speaker until the «PAIR» indicator equally starts to flash.
The connection is now being established automatically. After approx. 20 seconds, the indicator stops blinking and remains lit when the units are connected
SET THE SUBWOOFER VOLUME
To set your subwoofer’s volume, simply adjust the «VOLUME» knob until you get the desired result.
Tip: Subwoofers are often set too loud. Therefore, try different volumes and, if in doubt, opt for the softer setting.
CONFIGURE YOUR SUBWOOFER
Besides easily establishing a wireless connection, using a subwoofer will also simplify the loudspeaker management. Provided that the «SOUND» switch on your Ace Tx is flipped to «SUB», the frequency settings (adjusted by turning the FREQUENCY» knob) on your sub medium will be used accordingly by your Ace speakers.
In this «SUB» setting, the lower frequencies are reproduced by the subwoofer while the Ace speakers reproduce frequencies higher than the selected «FREQUENCY».
WE WISH YOU AN UNFORGETTABLE SOUND EXPERIENCE!
DO YOU NEED FURTHER INFORMATION TO SUCCESSFULLY COMPLETE THE INSTALLATION?
A comprehensive manual on every model, including additional instructions and FAQs, can be downloaded from our website.
WARRANTY REGISTRATION
We don’t want you to miss out on our warranty period of 6 years or 3 years on
electronics, so don’t forget to register your product on
piega.ch/en/warranty-registration
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>