ADTRAN 17600021F1 834-5 Service Delivery Gateway Wi-Fi 5 Gigabit Router User Guide
- June 4, 2024
- ADTRAN
Table of Contents
Quick Start
ADTRAN
834-5 Service Delivery Gateway
Wi-Fi 5 Gigabit Router
August 2021 61760002F1-13A
P/N: 17600021F1
Overview
WARNING! Read all warnings, cautions, notes and installation instructions
before installing or servicing this equipment.
The ADTRAN® 834-5 is a carrier-class Dual-Band Wi-Fi 5 Gigabit Ethernet
router, built to deliver top-end Wi-Fi 5 performance, true gigabit routing
throughput, and advanced service delivery capabilities. This quick start
describes how to install ADTRAN’s 834-5 Service Delivery Gateway. The 834-5
WiFi 5 Gigabit Router is an indoor gateway delivering premium multi-Gigabit
services.
- “Installing the 834-5 Gateway” on page 2
- “Product Specifications” on page 4
- “Safety and Regulatory” on page 4
Figure 1 illustrates the front and back of the 834-5 gateway.
Figure 1. Front and Back of the 834-5 Gateway
WARNING!
WARNING indicates a hazard that, if not avoided, could result in death,
injury or serious property damage.
CAUTION!
CAUTION indicates a hazard that, if not avoided, could result in service
interruption, damage to the equipment, or minor property damage.
NOTE
NOTES inform the user of additional, but important, information or
features.
Features
The features of the 834-5 gateway include the following:
- 1x Gigabit Ethernet (RJ-45) WAN interface
- Subscriber interfaces
- 4x Gigabit Ethernet (RJ-45) interfaces
- 1x USB 3.0 (Type A) Host port
Installing the 834-5 Gateway
The following are guidelines for basic installation of the 834-5.
NOTE Refer to the national, state and local electrical codes for the
requirements for power, grounding, wiring, and installation methods.
CAUTION!
The product is intended for indoor use only. Ethernet cables and attached
equipment are intended for use within the same building with equipotential
bonding, and not intended to be placed in separate buildings or structures.
Failure to deploy as described could result in permanent damage from lightning
or other electrical events and voids the warranty. Furthermore, all
connections from outside of the building, such as old wiring, must be
disconnected prior to use.
Package Contents
- ADTRAN’s 834-5 WiFi 5 Gigabit Router
- 12V DC power adapter
Prior to Installation
Before installing the equipment, inspect the gateway. If damage has occurred
during shipping, file a claim with the carrier, and then contact ADTRAN
Customer Support. For more information, refer to the product warranty
available online at https://adtranwp.support.warranty.
Required Tools
No special tools are required for installing the 834-5 gateway. If installing
the gateway on a wall, a #2 Phillips-head screwdriver is required for
installation.
Mounting Options
There are two options to install the 834-5: desktop and wall mount. Be sure to
route and secure the fiber and cables in a manner that will prevent damage.
These options are described below.
Desktop Installation
The 834-5 can be placed on a desk or table. The following table shows the
recommended minimum distance (in feet and meters) between the gateway and
household appliances to reduce interference.
Household Appliance| Recommended Minimum Distance (in feet and
meters)
---|---
Microwave ovens| 30 feet / 9 meters
Baby monitor – analog| 20 feet / 6 meters
Baby monitor – digital| 40 feet / 12 meters
Cordless phone – analog| 20 feet / 6 meters
Cordless phone – digital| 30 feet / 9 meters
Bluetooth devices| 20 feet / 6 meters
ZigBee| 20 feet / 6 meters
WARNING! Ensure that the 834-5 does not come in contact with water or
other liquids.
CAUTION! Ensure that the 834-5 is not located in direct sunlight or
next to any thermal obstructions.
Wall Mount Installation
The 834-5 can be mounted on a wall. Wall Mount Kit (17600192F1) can be ordered
for mounting the 834-5. Instructions are provided in the related Quick Start
Guide (617600192F1-13A).
Connecting the 834-5 Gateway
Figure 2 illustrates the installation (connection) options for the 834-5
gateway.
The following subscriber connections are available on the rear of the
834-5:
- 4x Gigabit Ethernet (RJ-45 Connectors) – LAN 1- 4 ports
- 1x Gigabit Ethernet port (RJ-45 Connector) -WAN port
- 1x USB 3.0 (Type A Connector) port
To connect the subscriber Ethernet interfaces, refer to Figure 2 and insert a Category 5E (or better) RJ-45 cable into one of the LAN ports (labeled LAN 1-
- or the Gigabit Ethernet port (WAN) until there is an audible “click”.
Connecting the Power Supply
- Connect the end of the power adapter to the Power port on the rear panel of the gateway
- Plug another end of the power adapter into the wall outlet.
- Confirm that the power is connected properly. The Power LED should be lit on the front of the gateway.
Resetting the Gateway
A reset button is available if the 834-5 needs to be rebooted. To reboot the
834-5, press the Reset button on the rear panel of the gateway for 5 seconds
or less. To reset the device to custom defaults, press the Reset button for 5
seconds or more.
Product Specifications
Electrical
- Power is provided by a 12V DC Power Adapter that is included with the 834-5. The power adapter operates from a power source of 100 to 240V AC, 50 – 60 Hz. The nominal output is 12V DC +\–5% with a maximum current rating of 4.0 Amps. For US and Canadian applications, a UL Listed limited power source (LPS) is required. For deployment outside of North America, an LPS specifically approved for that country, such as a CE Mark, is required.
NOTE
It is strongly suggested that the power supply (a 5-foot (1.5 m) power cord)
included with the 834-5 be connected to a surge suppressor device that can
have its own extension cable. The surge protection device should provide L-N,
L-G, and N-G protection. It is also recommended that the device contains a
visual ‘GOOD’ indicator.
Environment
- Operating Temperature: 32°F to 104°F (0°C to 40°C)
- Storage Temperature: -40°F to 158°F (-40°C to 70°C)
- Relative Humidity: 10 to 95 percent, non-condensing
NOTE
Changes or modifications not expressly approved by ADTRAN will void the
warranty.
Safety and Regulatory
This product meets the following compliance requirements:
- UL /cUL Listed
- FCC Part 15, Class B
- ICES-003 (Class B)
- IEC 62368-1
- EN 62368-1, AS/NZS 60950.1
- RoHS Compliant
This equipment contains no parts that can be serviced by the user.
Refer to the Safety and Regulator Notice for this product (P/N:
617600021F1-17) for detailed safety and regulatory information.
Documentation for ADTRAN Network Solutions products is available for viewing
and download directly from the ADTRANSupport Community website.
Go to: https://supportcommunity.adtran.com
ADTRAN offers training courses on our products, including customized training
and courses taught at our facilities or at customer sites.
For inquiries, go to: http://adtran.com/training
Warranty: ADTRAN will replace or repair this product within the warranty
period if it does not meet its published specifications or fails while in
service. Warranty information can be found online at
www.adtran.com/warranty. Trademarks: Brand
names and product names included in this document are trademarks, registered
trademarks, or trade names of their respective holders. Copyright © 2021
ADTRAN, Inc. All Rights Reserved.
Access additional safety information and product documentation using the QR
code or website.
https://supportcommunity.adtran.com/
ADTRAN CUSTOMER CARE:
From within the U.S. 1.888.423.8726
From outside the U.S. +1 256.963.8716
PRICING AND AVAILABILITY 1.800.827.0807
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>