OZARKE Dual Glow Wall Sconce Instruction Manual
- August 28, 2024
- OZARKE
Table of Contents
INSTRUCTION MANUAL
Dual Glow Wall Sconce
Thank you for shopping with Ozarké, we really appreciate your business. Our
goal is to provide an excellent customer service before, during and after
delivery. We’ve included a guide on how to install this light, should you
require additional assistance please feel free to email us at
info@ozarke.com and one of our customer service
representatives will reach out to assist you.
Before you get started:
When working with electrical wiring, follow these safety instructions to
prevent injury or damage:
- Turn off the power: Before starting any work, turn off the power to the area you will be working in.
- Use appropriate tools: Only use tools designed for electrical work and in good condition.
- Wear protective gear: Wear safety glasses, gloves, and other protective gear as necessary.
- Test for power: Use a non-contact voltage tester to check for electrical current before touching any wires.
- Avoid wet conditions: Do not work with electrical wiring in wet or damp conditions.
- Keep a safe distance: Stay away from exposed wires or electrical components.
- Seek professional help: Consult a qualified electrician if you are unsure about any aspect of electrical wiring or encounter any problems.
WARNING!
- Do not use the power supply beyond the specified range (100-240V,50Hz).
- Avoid scratching the surface and wires of the light during installation.
- Do not install the light outdoors.
- The lamp should not be close to corrosive chemical objects or gases. It should not be washed with water. It can only be wiped with a clean soft cloth.
Installation Instructions
- Mount the plate provided onto the wall. Ensure that the plate is level before securing it.
- Connect the wiring and match up the wires, then attach them with wire nuts.
- After connecting the wires, screw it with the provided screw nuts onto the plate.
- To assemble the glass, turn it in a clockwise direction and ensure that the screws are securely installed. Check the glass to ensure it is properly installed and tightened to prevent any loosening over time.
- Attach the bulb to the bulb base. Make sure it is correctly attached.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>