PIEGA Connect Plus Streaming and Connectivity Hub of Premium Wireless Series User Manual

PIEGA Connect Plus Streaming and Connectivity Hub of Premium Wireless

Series

IMPORTANT SAFETY INSTRUCTIONS

Read all safety instructions carefully

1. Heed all warnings.
2. Follow all instructions and recommendations.
3. Do not use this apparatus near water.
4. Clean with dry and soft cloth only.
5. Do not install near any heat sources such as radiators, heat registers, stoves, or other devices that produce heat.
6. Protect the power cord from being stepped on or pinched, particularly at plugs, convenience receptacles, and at the point they exit from the apparatus.
7. Only use accessories or attachments approved by the manufacturer.
8. Do not defeat the safety purpose of the polarized type plug. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
9. Unplug this apparatus during lightning storms or when unused for long periods of time.
10. Refer all servicing to qualified personnel. Servicing is required if the apparatus has been damaged in any way, e. g. the power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus. Equally if it has been exposed to rain or moisture, does not operate normally, or has been dropped.
11. The power plug should be easily accessible to disconnect the equipment.
12. Warning: To reduce the risk of fire and electric shock, do not expose this apparatus to rain or moisture.
13. Do not expose the apparatus to dripping or splashing and do not place objects filled with liquids, such as vases, on the appa-ratus.
14. Maintain 150 mm safety clearance all around the apparatus to ensure adequate ventilation.
15. Do not place objects with naked flames, such as lit candles on the apparatus.
16. This apparatus is approved for indoor use only.

PIEGA CONNECT PLUS AT A GLANCE

SCOPE OF DELIVERY

The scope of delivery includes:

INTEGRATED STREAMING CLIENTS:

The PIEGA connect plus comes with the following pre-installed streaming clients: Google Chromecast, Spotify Connect, Apple AirPlay, Roon Ready.

SPOTIFY CONNECT

Spotify Connect allows you to play your music directly from the Spotify app to your PIEGA connect plus.

The Spotify software is subject to third party licenses found here: https://www.spotify.com/connect/third-party-licenses. Simply use your smartphone, tablet or computer to remotely control listening on another device. Learn more on spotify.com/connect.

GOOGLE CHROMECAST BUILT-IN

Google Chromecast supports various music platforms and radio stations. With Google Chromecast built-in you can easily play music from your mobile device to your PIEGA connect plus.

Chromecast built-in is a trademark of Google LLC.

APPLE AIRPLAY

Apple AirPlay lets you share music from your Apple devices to your loudspeakers. And what you share always stays personal and private.

ROON READY

Roon Ready network devices have Roon’s streaming technology built-in, and are certified by Roon Labs to provide the highest level of quality and performance in network streaming:
https://roonlabs.com

PIEGA ROOMCONTROL APP
Every room has individual acoustic properties that may have a substantial impact on sound reproduction. Our PIEGA Control App with integrated PIEGA RoomControl function recognises these factors in a quick and easy way, calibrates your speakers accordingly and balances negative effects so that you will get the most from your high-quality speakers. The PIEGA RemoteControl function replaces the wireless remote control if you wish to operate all functions conveniently from your smartphone. The RoomControl app will be available from Spring 2022 in your Google Play or Apple app store.

OPERATING ELEMENTS

PIEGA CONNECT PLUS AT A GLANCE

loudspeaker group
PAIR/GROUP| Button to select the loudspeaker group and pair the remote control
DC 5V/3A| Connects the external power supply

REMOTE CONTROL AT A GLANCE

CONNECT TO LOCAL NETWORK (WIFI)

Google Home offers a simple way of integrating your speakers into your local network and operating them easily:

1. Download the Google Home app on your smart device.

2. Power your speakers.
   IMPORTANT: Ensure power is connected for at least 1 minute for Google Home to detect your PIEGA connect plus.

3. Open the Google Home app on your smart device.

4. A message should pop-up allowing you to select your PIEGA connect plus (Stereo Hub). Alternatively, you can add a new device by pressing «+» in the upper area of the screen.

5. Follow the instructions on the app to complete the installation.

Note : If the setup with Google Home fails, we recommend using the «RESET» function on the rear panel of your PIEGA connect plus. Restarting your smart device might also help.

WIRELESS CONNECTION TO YOUR SPEAKERS

The «GROUP» function is only required when using several PIEGA wireless systems (more than one PIEGA connect plus). The music signal is only sent to speakers within the same group. This ensures the smooth operation of up to three independent PIEGA wireless systems in one room/flat/house.

CONFIGURE THE SPEAKER GROUP

Make sure to set the same colour «GROUP» on your PIEGA connect plus and your Premium Wireless speaker. As long as you’re using just one PIEGA connect plus, you are free to choose any colour: white, blue, or red.

PIEGA CONNECT PLUS

Press «PAIR/GROUP» for at least 3 sec. to make a colour selection. The «GROUP» indicator confirms the selected group.

Once the colours match on both units, the connection is being established automatically.

PIEGA PREMIUM WIRELESS LOUDSPEAKER

PIEGA Premium Wireless loudspeaker Flip the switch to select the desired group. The «GROUP» indicator confirms the selected group.

TRI-BAND 2.4/5.2/5.8GHZ

For wireless signal transmission (music PIEGA connect plus to loudspeaker) the following frequencies are used: 2.4/5.2/5.8GHz (tri-band). Your PIEGA connect plus automatically selects the best suited frequency to ensure the best possible wireless transmission at all times.

CONNECT YOUR REMOTE CONTROL

Before the first use, you will have to couple your remote with the PIEGA connect plus.

• Press the «PAIR/GROUP» button on your PIEGA connect plus 2 × shortly to start the pairing process.
• Then press any button on your remote.
• The two units are now successfully connected.

TV CONNECTIVITY OPTIONS

HDMI ARC CONNECTION

If your TV has an HDMI ARC output you can easily and conveniently connect your PIEGA connect plus by connecting your TV to the «HDMI ARC» input on your PIEGA connect plus.

Double-check the settings on your TV to make sure the sound is played back through the HDMI ARC output. The HDMI output must be configured to PCM format.

BLUETOOTH CONNECTION

In addition to the integrated streaming clients, you can also connect your smart device directly via Bluetooth to the PIEGA connect plus:

• Press «PAIR» on your remote control.
• The «PAIR» indicator starts blinking.
• From the Bluetooth settings on your device select PIEGA connect plus and start connecting.

Note : Bluetooth is played via «STREAM».

MUTE / ON / OFF

• The system can be muted (MUTE) by briefly pressing «POWER ON/OFF» .
• The «MUTE» indicator starts flashing to confirm the mute status.
• Press the button for approx. 2 sec. to switch off your PIEGA connect plus.
• Briefly pressing «ON/OFF» again restarts the system.

INPUT SOURCE SELECTION

Use your remote control to select the input source of your choice. Exception: When streaming (e.g. Spotify Connect), the PIEGA connect plus automatically switches to the «STREAM» input.
Once the streaming is stopped, the PIEGA connect plus automatically falls back to the previously used input source.

FIRMWARE UPDATE

Firmware updates are usually installed via Google Chromecast running automatically in the background. If you wish to update the firmware of your PIEGA connect plus manually, follow the steps below:

TECHNICAL DATA

Supported streaming protocols|
---|---
Google Chromecast Apple AirPlay

Spotify Connect (incl. Spotify HiFi) DLNA

Bluetooth 4.2

|
Network module (WiFi)|
WLAN Standard

Maximum resolution

| IEEE 802.11a/b/g/n & 802.11ac Dual Band 2.4GHz / 5.8gHz 192kHz (24bit)
KleerNet (PIEGA connect plus to PIEGA Premium Wireless speakers)
Data rate Tri-band

• group red only

| 48 – 96kHz* / 24bit

2.4 / 5.2 / 5.8GHz (auto band switching)

Wired inputs|
Analog (stereo) Analog (stereo)

(3×) Optical (S/PDIF) Coax (S/PDIF) HDMI ARC

USB Audio

| RCA

3.5 mm Jack Toslink

RCA HDMI

Type B

| ****

192kHz /24bit 192kHz /24bit 192kHz /24bit 192kHz /24bit

Supply|
External AC adapter| 100 – 240V 50/60Hz, 5V @ 3A
Dimensions|
Dimensions Weight| 172 × 101 × 42 mm

350 g

DECLARATION OF CONFORMITY

PIEGA AMP/speaker is in conformity with the following directives:

• LVD:2014/35/EU
• EMC:2014/30/EU
• RED:2014/53/EU
• ERP:2009/125/EU
• ROHS:2011/65/EU
• REACH:1907/2006/CE

STANDBY

After 60 minutes without any incoming music, the device will automatically go into a network standby mode. This is indicated by a red light on operating status display, and the power consumption goes down to 0.5 W. The device will automatically wake up upon receiving a music signal, but we encourage you to completely turn off your device when not in use for an extended period of time.

References

• Spotify - Connect
• Roon
• Third Party Licenses | Spotify for Developers

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>