Wildix MONOLED-BT Bluetooth Headset User Guide

Table of Contents

MONOLED-BT/ DUO LED-BT HEADSET USER GUIDE

1 x MonoLED-BT/ DuoLED-BT Headset
1 x Base Station
1 x USB Type-C to Type-C cable
1 x USB Type-A to Type-C adapter
1 x portable case

Notes:

It is required to install WIServiceIlaboratkin -> Settings -> Extensions) to use MonoLED-BT/ DuoLED-BT.
MonoLED-BT headset is available only as HWaaS.

The Headset supports a dual (multipoint) wireless connection, which means it can be connected to two devices

simultaneously:

Via Base Station. Such connection provides full support of LED user and call statuses and is compatible with:

Apple Mac, Windows PC
WorkForce
WelcomeConsole Temporary limitation:
Are!_____ headset cannot be connected to Vision/ SuperVision via
Base Station, the support will be available later

Via Bluetooth module embedded in the Headset itself. Such connection doesn’t provide LED statutes support and is compatible with:

POWER ON/ POWER OFF

Press the Multi-function button for 3 seconds.

HEADSET AND BASE STATION OVERVIEW

Connect the USB cable to the Base Station
Plug the cable into a device USB port (use Type-A to Type-C adapter ft needed)
Tum the Headset on
The Headset Status LED starts blinking and the voice prompt announces “Your Headset is connected”
For Collaboration, set “Wild ix MonoLED-BT”/ DuoLED-BT” as audio device in Collaboration -> Settings -> Web phone

Note: Are Headset and the Base Station are paired by default. If you accidentally unpair them, proceed with the Mowing steps to pair them back

Press and hats Pairing button on the Base Station for 3 seconds the Pairing LED imitator starts blinking with fast blue and red blinks
Make sure the Headset is powered off Press and hold the Multi function button for 3 seconds until you hear “Paver on”. Keep pressing for 3 seconds more until you hear “Pairing”
The Headset Status LED starts blinking and the voice prompt announces War I headset is connected”

CONNECT VIA BLUETOOTH EMBEDDED IN THE HEADSET

Unplug the Base Station and turn the Headset off
Activate Bluetooth on a device you want to connect the Headset to
Press and hold the Multi-function button for 3 seconds until you hear “Power on”. Keep pressing for 3 seconds more until you hear “Pairing”
Search for MonoLED-BT/ DuoLED-BT in the Bluetooth devices list on your device and select it for pairing
The Headset Status LED starts blinking and the voice prompt announces “Your Headset is connected”

Status LED

User/ call status	LED indication	Color
Available	Steady on	Green
Away	Yellow
DND/ in conference	Violet
Outgoing call/ In call	Red
Hold	Fast short blinks	Status color + red
Missed call	Long blinks followed by fast short blink	Status color + red
Incoming call	Fast short blinks	Red

Headset status LED

Answer a call
Charging| Steady on| Red
Fully charged| Blue

Base Station pairing LED

CHECK THE BATTERY LEVEL

On Windows, go to Quick Launch Toolbar -> right-click on Wildix Integration Service icon and check the level of battery (Low, Medium, High):
On macOS, go to Menu Bar -> click on the service icon and check the level of battery (Low, Medium, High):

ANSWER A CALL
Press the Multi-function button to answer a call.

ADJUST VOLUME DURING A CALL/ RINGER VOLUME
Press Volume Up to increase the volume.
Press Volume Down to decrease the volume.

MUTE A MIC
Press the Mute button during a call to put a call on hold/resume.

PUT ON PAUSE/ RESUME A CALL

Press the Multi-function button for 2 seconds during a call to put a call on hold/resume.

END A CALL
Press the Multi-function button to finish a call.

Full guide online

Version 01/2022