Wildix WorkForce WiFi Dongle with Type-C Adapter User Guide
- June 6, 2024
- Wildix
Table of Contents
- Wildix WorkForce WiFi Dongle with Type-C Adapter User Guide
SAFETY INFORMATION
https://www.wildix.com/safety-information/
PACKING LIST
- 1 x WorkForce WiFi Dongle
- 1 x Type-C adapter
Notes
- Min. required WorkForce firmware version for WiFi Dongle connection: 65.145.4.12
- Available only as a HWaaS item
WI-FI DONGLE CONNECTION
- Connect WorkForce WiFi Dongle to Type-C adapter
- Plug the Dongle into WorkForce USB Type-C port.
Notes
- Check that ACL rule “Can use” – “Advanced phone settings menu” is set in WMS -> Users -> Groups for users who need access to the feature.
- WorkForce with a connected dongle requires at least 5V 2A power source.
- Wi-Fi Bridge mode is not supported.
NETWORK CONNECTION
To connect WorkForce to a Wi-Fi network:
- Press Menu soft key on WorkForce.
- Go to Network menu and select WLAN option.
- Enable Wi-Fi connection: use Navigation keys or press Switch soft key to change Wi-Fi connection status from Disable to Enable; press Save soft key.
- Searching for Wi-Fi Networks is in progress. After it is completed, there is a list of all available networks.
- Select a Wi-Fi network from the list and press Connect soft key.
- Enter password and press Save soft key.
- WorkForce is now connected to the Wi-Fi network; the LED indicator blinks with fast short blue flashes during data transfer.
References
- Wildix PBX | VoIP Solutions | Unified Communications | WebRTC
- HWaaS - Hardware as a Service - Documentation - Confluence
- Regulatory Compliance & Safety Information for Wildix Products • Wildix
Read User Manual Online (PDF format)
Loading......