Wildix WP480G WorkForce Phone User Guide

Wildix WP480G WorkForce Phone

PACKING LIST

Note: WorkForce support starts from WMS v. 4.03.44817.03.

• 1 x WorkForce phone
• 1 x handset
• 1 x handset RJ9 cord
• 1 x stand

SAFETY INFORMATION

www.wildix.com/safety-information/

MOUNTING INSTRUCTIONS

Attach the stand to the phone (desk mounting); for wall mounting, use a wall mount bracket (article can be purchased separately, WMP code: WorkForce- WallMount).

CONNECTION

The ports are situated on the rear panel of the phone

• Connect the handset to the port using the handset cord
• Connect the phone to the network PoE switch using RJ-45 cable
• (Optional) Connect the port to the PC using RJ-45 cable
• (Optional, this is a PoE device) Connect the phone to the power supply (power adapter can be purchased separately, WMP code: PS-5V2A)
• (Optional) Connect the headset to the port (headsets can be purchased separately, we recommend Wildix Headsets, WMP codes: WHS-MONO, WHS-DUO)
• (Optional) Connect the USB headset (headsets can be purchased separately)/ WorkForce WiFi Dongle (dongle can be purchased separately WMP code: WiFiDongle)

PHONE OVERVIEW

LOGIN

1. Lift the receiver and dial 99
2. Enter your extension number
3. Enter the first five characters of your password
4. Press 1 when prompted

To enter your password from the phone’s keypad: press once an alphanumeric key corresponding to a letter which you need to enter; press the star button (*) to enter any special character.

Example: Password: 4Ag7$Zl@ Enter: 4247*

BLF / FUNCTION KEYS

Function keys must be set up in Collaboration Settings -> Function keys or by the PBX administrator.x This phone supports up to 16 Function keys distributed over 2 pages. Use Navigation keys to move between pages.

CALL FEATURES

Press Feature. Softkey from idle to set the following call features for each call type (Internal, External, Blacklist, Whitelist), based on user status (Available, DND, Away): Call reject, Call forwarding, Call Waiting, Mobility, Ring Tone.
Features can be also set up in Collaboration Settings -> Features.

PLACE A CALL

Manually: Enter the number and press Send Softkey. To switch between speaker mode and handset mode during a call: press the Speaker key. To switch between speaker mode and headset mode during a call: press the Headset key.
Dial a user for whom you have assigned a Colleague Function key: press the corresponding Function key. Call from call history: press History Soft key from idle and select the number using Navigation keys, then press Dial Softkey.
Call from Phonebooks:

1. Press the Phonebook key.
2. Press Filter Softkey and select the phonebook
3. Press the Search Soft key to search this phonebook and enter the name or phone number
4. Press Enter Softkey and select the contact using the Navigation keys
5. Press Dial Softkey

MUTE, SPEAKER, VOLUME CONTROL

• Press Mute key to mute / unmute the microphone.
• Press Volume Up / Down keys to adjust the volume.
• Press Speaker key to turn on the Speaker mode.

HOLD / SECOND CALL

1. Press Hold Soft key during a call to put a call on hold
2. Press New Soft key to make a second call, then enter the number manually or press Select Soft key to search for the contact in call history / in phonebooks

CONFERENCE

1. Press New Soft key during a call (the call is put on hold)
2. Make a second call to the contact you would like to invite to the conference call
3. When the third party answers, press Conference Soft key

ACCESS VOICEMAIL

1. 1. Press the Voicemail key
2. If requested, enter the first five characters of your password
3. Select the message and press Play Softkey to listen to it; press Info Soft Key for more information or to delete the message

Full guide online:

www.wildix.com

CALL TRANSFER

Blind transfer (the desired party/extension is not notified of the impending transfer)

1. Press Transfer key during a call (the call is put on hold)
2. Dial the desired party/extension
3. Hang up

Blind transfer via Colleague BLF / Function key: make sure Direct transfer option is enabled for this Function key in Collaboration:

1. Press the corresponding Function key during a call Attended transfer (the desired party/extension is notified)
2. Press Transfer key during a call (the call is put on hold)
3. Dial the desired party/extension
4. Notify the third party of the impending transfer
5. Hang up to transfer the call

Attended transfer via Colleague BLF / Function key: make sure Direct transfer option is disabled for this Function key in Collaboration:

1. Press the corresponding Function key during a call (the current call is put on hold)
2. Notify the third party of the impending transfer
3. Hang up to transfer the call

STATUSES AND NOTIFICATION ICONS OVERVIEW

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>