IP44 LWA402 Outdoor Lighting 12w Aluminium Decorative LED Outdoor Wall Light Instructions
- June 6, 2024
- IP44
Table of Contents
IP44 LWA402 Outdoor Lighting 12w Aluminium Decorative LED Outdoor Wall Light
Instructions for use
- Push main cable through cable entry part of the wall bracket and ensure tight seal.
- Attach wall bracket. Pay attention of position ,,top”. Use the washer gaskets with rubberized face against to the wall bracket. Seal unused mounting holes.
- Establish ground connection and connect power lines. 4. Attach top part of the luminaire to the wall bracket.
Press luminaire to the wall bracket and tight set screws flush and evenly.
Light technology:
230V Power LED / 2700K + 3000K
System performance:
2700K: 15 W/451 lm
3000K: 15 W/480 lm
EEC
Technical information:
operating voltage 230V / 50Hz IP65
Protection class
Safety class 1
Luminaire is suitable for mounting on normal inflammable surfaces.
Conformity mark
Maintenance:
Disconnect the electrical installation. This luminaire contains built-in LED
lamps. The LED lamps can be replaced by IP44.de in case of a failure of the
LED. In this case, please get in touch with your retailer.
Dimming:
The luminaire can be dimmed with an approved leading-or trailing edge dimmer.
Please contact IP44.de service center for a list of approved dimmers.
Care:
Regularly clean luminaire from dirt and deposits. Do not use a high pressure
cleaner for cleaning. Please note care instructions at
www.IP44.de.
Safety:
We point out that the electric connection of light fixtures has to be done by
a certified installer. We assume no accountability for damages which are a
result of non-appropriate mounting or application of the luminaire.
Modifications on the luminaire will result in loss of warranty.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>