Hanwha Techwin SBP-301HM2 Hanging Mount Adaptor Instruction Manual

Hanwha Techwin SBP-301HM2 Hanging Mount Adaptor Instruction Manual

Package

BP-301HM2/SBP-301HM5

HANGING MOUNT ADAPTOR      SCREW M3xL8 (2EA) M4xL8
(3EA) M4xL10 (3EA)

HANGING MOUNT ADAPTOR          SCREW (4EA)

Product Overview

This product is used to install the Anti Vandal Camera or Plastic Camera into the Wall Mount Adaptor (SBP-300WM or SBP-300WM1), Ceiling Mount Adaptor
(SBP-300CM) or Parapet Mount Adaptor (SBP-300LM).

Installation Precautions

• Make sure that the installation place can endure at least 4 times of the total weight of the Hanging Mount Adaptor, Camera, and Wall/Ceiling/Parapet Mount Adaptor.
•  The Hanging Mount Adaptor can be also connected to 1.5″ NPT screw-thread pipe as well as to the Wall/Ceiling/Parapet Mount Adaptor

Installation(SBP-301HM2/SBP-301HM5)

1. Insert the Hanging Mount Adaptor to 1.5″ NPT screw-thread (female) pipe or to the Wall/Ceiling/Parapet Mount Adaptor (SBP-300WM or 300WM1/ 300CM/300LM) and turn it clockwise to secure to the Pipe or Adaptor.
   Make sure you fix the Pipe or Adaptor so that it reaches to the end of the 1.5″ NPT screw thread on the Hanging Mount Adaptor. If not secured tightly, the Hanging Mount Adaptor may loosen from the Pipe or Adaptor, causing physical damage or malfunction. (Make sure you check the connection between two components before proceeding with the next step.)

2. Install the Hanging Mount Adaptor onto the camera.
   ` Make sure you insert the Adaptor in the right direction.

< Vandal Dome Camera>

Installation(SBP-301HM3/SBP-301HMW3)

1. Insert the Hanging Mount Adaptor to 1.5″ NPT screw-thread (female) pipe or to the Wall/Ceiling/Parapet Mount Adaptor (SBP-300WM or 300WM1/ 300CM/300LM) and turn it clockwise to secure to the Pipe or Adaptor.
   J ` Make sure you fix the Pipe or Adaptor so that it reaches to the end of the 1.5″ NPT screw thread on the Hanging Mount Adaptor. If not secured tightly, the
   Hanging Mount Adaptor may loosen from the Pipe or Adaptor, causing physical damage or malfunction. (Make sure you check the connection between two components before proceeding with the next step.)

2. Install the Hanging Mount Adaptor onto the camera.
   ` Make sure you insert the Adaptor in the right direction.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>