lEDYi Lighting T1 Wall Mounted Touch Panel Instruction Manual
- June 6, 2024
- LEDYI Lighting
Table of Contents
LEDYi Lighting T1 Wall Mounted Touch Panel User Manual
Model No.: T1, T2, T3, T4
1-4 color/Glass panel/Touch color wheel/DC input/4 channel constant voltage PWM output/Wireless remote control
Features
- Touch panel single color, dual color, RGB or RGBW PWM constant voltage controller.
- Ultra sensitive high strength glass touch panel with touch color wheel in the middle.
- Compatibility with RF 2.4G single zone or multiple zone remote control.
- Touch keys with LED indicator.
- White & Black glass panel available.
Technical Parameters
Key Function
-
T1 Single color panel
-
T2 Dual color panel
-
T3 RGB panel
- T4 RGBW panel
Turn on key tone: Long press power key for 5s when light is off, will turn on or turn off key tone.
Wiring Diagram
LED power supply voltage and power select :
- 12V lamp, Input 12V power supply, can load 0~144W,
- 24V lamp, Input 24V power supply, can load 0~288W, The power supply power must larger than load power 20%.
Match Remote Control (two match ways)
The touch panel controller can also match with the RF remote (optional).
End user can choose the suitable match/delete ways. Two options are offered
for selection:
Use On/Off key
Match:
Turn on light, turn off, immediately press the On/Off key of the panel for 5s,
then press on/off key (single zone remote) or zone key (multiple zone remote)
of the RF remote within 5s.
The LED indicator fast flash 3 times means match is successful.
Delete:
Turn on light, turn off, immediately press the On/Off key of the panel for
10s, delete all matched RF remote.
The LED indicator fast flash 6 times means all matched remotes were deleted.
Use Power Restart
Match:
Switch off the power, then switch on power again, immediately short press
on/off key (single zone remote) or zone key (multiple zone remote) 3 times on
the remote.
The light blinks 3 times means match is successful.
Delete:
Switch off the power, then switch on power again, immediately short press
on/off key (single zone remote) or zone key (multiple zone remote) 5 times on
the remote.
The light blinks 5 times means all matched remotes were deleted.
RGB/RGBW Dynamic Mode List (only for T3 / T4)
Mechanical Structures and Installations
Installation diagram:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>