BaKon 950D Portable Digital Control Temperatures Soldering Station Instruction Manual
- June 6, 2024
- BaKon
Table of Contents
BaKon 950D Portable Digital Control Temperatures Soldering Station
Character
- Light handle, no feeling of fatigue for long time use .
- various tips for choice and easy to replace.
- Soldering iron choice: BK950 with T3 series heating element (with tips)
Specification
Soldering iron handle
Above specification subject to the real products, for any change no prior notice.
Temperature Mode
Please check the packing to confirm that all items are correct.
Replace heating element
Take out the old heating element form the iron handle as per above picture
Note : If it is still do not heating up after replacing heating element,
please move the heating element.
Fahrenheit/Celsius switch: In the shutdown state, press the up key and open
the power switch at the same time, thus enter into Fahrenheit mode,ln shutdown
state, press the down key and open the power switch at the same time. thus
enter into Celsius mode. Temperature Mode Shift: Press the temperature adjusts
key shortly, press it shortly which shows present temperature mode, and press
it again shortly which is to the next mode, P1-P5 cycle. Precision set
temperature: For example, when set temperature 380’C, press adjusts keys up or
down 3s which can add, subtract temperature. Temperature calibration: Present
set temperature 350’C, test real temperature 340’C, calibration method as
below: Press the up and down keys in the same time, there is scintillation for
hundreds and tens on the soldering station, adjust the temperature digit
number by down keys (hundred, ten, single),and adjust temperature by up keys,
then confirm. And test the real temperature again by the thermometer, if any
tolerance kindly repeats above step.(School / Celsius need to calibration
temperature respectively)
Note : please readjust the temperature after replacing the heating
element or there will be temperature tolerance.
Notice
When the power is turned on, the soldering tip’s temperature is higher than150 °C (356 °F) to 356 °C (842 °F ). Abuse may cause burns or fires, do please obey the following items: This machine has been calibrated temperature when out of factory, but because there is some resistance tolerance for heating element, suggest recalibrate temperature when the fist time using or replace heating element. Do not touch soldering tip metal part Do not use soldering tip near flammable objects Inform worker that soldering tip is very hot, may cause dangerous accidents. Do please turn off the power when rest or finish soldering. When replacing parts or insert soldering tip must be turn off the power, and wait until the tips back to room temperature. To avoid damaging soldering station and maintain a safe working environment, do please comply with the following matters: Do not use soldering tips to do other job except normal soldering. Do not knock working table to remove flux residue which may damage the soldering station seriously. Do not change the soldering station. Do not wet soldering station and can not use soldering station when hand is wet. There will be smoke when soldering, workshop shall have good ventilation facilities. When using soldering station, do not do anything that may hurt body or damage objects happen.
SHENZHEN BAKON ELECTRONIC TECHNOLOGY CO.,LTD.
ADD: 5th Floor, 1st building, Fu Bi Lun Industrial Area, Chaoyang Road,
Songgang Street, Bao’An District, Shenzhen, China 518105 TEL: +86 755 89575688
FAX: +86 755 89574599 SITE: www.bakon.cn Email:
postmaster@bakon.cn
Attention:
The soldering station adopts an integrated plug-in heating core, which has a
fast heating speed, long service life and convenient replacement. In order to
ensure the good performance of the soldering station, please select the
original heating core and soldering iron head, thank you!
Warranty Terms
- The table for feedback from customers should be returned to our company within a month after the date of purchase. In this way, customers may enjoy a one-month repair warranty.
- Repair Warranty and Purchase Certificate should be presented. The warranty only applies when all the required documents are available.
- The warranty does not apply when the equipment has received damage through abuse, carelessness, improper installation, accident or mishandling during shipment, connecting to improper line voltage, or has been serviced by anyone other than an authorized factory representative.
- After the warranty period. we are ready to provide charged repair service. perfect as always.
Dear Sir/ Madam:
Thank you for purchasing our products. To improve our service and ensure the
proper use of our products, please kindly write down your suggestions.
- Name of Product
- Date of Purchase
- Your Suggestions
- Package
- Functions
- Others
Warranty card
The warranty is valid for one year since the purchase of this, any quality
problem is found, please send it back to us with a courier fee to be
collected, upon receipt of the returning unit, we will repair it and send it
back to the customer within two working days.
Notice : Please enclose the warranty card along with the returning
product, or else we have the right to reject the repair, thanks for your
corporation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>