ISDT P10 Dual Channel Smart Charger User Guide
- June 6, 2024
- iSDT
Table of Contents
P10 Dual Channel Smart Charger
User Guide
Thanks for purchasing the ISDT P10 Smart Charger.
Please visit. www.isdt.co for more details on the
functions of this smart charger, as well as purchase various accessories.
Functions of products will be kept on upgrading, the manual in your hand may
be different from the actual operation, please refer to the actual functions.
Warnings and Safety
Tips For your safety and a better user experience, please read this manual and follow the instruction before using the new charger.
- Never use the charger without supervision, please stop using the charger and refer to the manual for reasons of any functional abnormity.
- Keep the charger away from dust. humidity, rain, and high temperature, as well as avoid direct exposure to the sunlight and intense vibration.
- Place the charger on a heat-resisting, non-flammable and insulating surface. Do not use it on the car’s seats, carpet, or other similar places. Keep inflammable and explosive objects away from operation areas of the charger.
- Read the instruction manual carefully to be familiar with the features of the charger, and set proper charging parameters before operating. Setting the parameters incorrectly will result in damage to the product, personal property and cause serious injury as well.
Specifications
Model No.: P10
Input voltage: DC 10-30V
Output voltage: DC 1-26.4V
Working temperature: 0-40t
Storage temperature: -20-60t| Max. input current: 20A
Charging current: 0.2-10.0Ax2
Max. charging power: 250Wx2
Dimension: 90.5×90.5x47rrrn
Weight: About 250g
---|---
Abnormal voltage alarm: Support Incorrect cell count setting alarm: Support
Supported battery. LiFe,Lilcn,LiPo,LiHv 1-6S Pb 1-105 ; NiMH/Cd 1-16S
Balance current: 0.5A/Cell Max
Port / Button
Preset Battery Type of Charger and Task Parameters
| NiCd/MH| Pb| LiFe| LiIon| LiPo| Liev
---|---|---|---|---|---|---
Rated voltage| 1.20V| 2.00V| 3.20V| 3.60V| 3.70V| 3.80V
Full charge voltage| 1.40V| 2.40V| 3.65V| 4.10V| 4.20V| 4.35V
Balance charge| | | | | |
Unbalanced charge| | | | | |
Supported cell count| 1-16S| 1H OS| 1-6S| 1-6S| 1-6S| 1-6S
Max. charging current| 10.0A| 10.0A| 10.0A| 10.0A| 10.0A| 10.0A
How to Confirm Charging Current
Make sure to know the maximum charging current of the battery before charging, never use excessive current to charge to damage your battery, which will result in an overheating even explosion during the charging process. The charging and discharging capacity of the battery is usually marked with a C value. Multiplying the charging C value and battery capacity equals the maximum charging current supported by the battery. For example, for a 1000 mAh battery with a charging capacity of 5C, the maximum charging current would be 1000*5=5000mA; therefore, the maximum charging current is 5A. For a lithium battery, if it is impossible to confirm the supported charging C value, please set the charging current below 1 C, for the sake of its (lithium battery) safety. The reference relation between C value and charging time: charging time >60 minutes/ charging C value (e.g. it needs around 60-70 minutes to complete charging with 1 C). Due to differences in battery conversion efficiency, the time to complete the charging might be extended.
Operating the Charger
Power on P10 smart charger, connect the battery, and short touch the middle key of the touch board to enter the task setting menu as follows:
| Task | Charge |
|---|---|
| Battery | LiHv, LiPo, LiIon, LiFe, Pb, NiMh/Cd |
Battery and
cell count| LiFe,Lilon,LiPo,LiHv (1-6S) ; Pb (1-1 OS) ,
NiMH/Cd (1 -1 6S)
Current| 0.2-10.0A
charge
A balancing port is strongly recommended when charging lipo battery, which
can make sure to monitor voltage on each cell battery and balance it when
charging. Warning beeper will yell before starting charging lipo if in non-
balanced mode(no connecting with balance port). Current setting range:
0.2-10.0A.
Charging Screen
In operation status, the Press arrow keys will shift to different menu pages.
As it’s arranged as the voltage of each cell, IR of each cell information,
SmartPower information, working parameters. The cell voltage and internal
resistance will only be displayed under balanced charging mode.
Advanced settings
In stand-by mode. Press and hold the left and right channel selection keys at
the same time to enter the advanced setting menu . The menu items are as
follows:
DC power supply
Select this function, CH1 of the charger will be a DC power supply with
adjustable output voltage 5-24V, and current 0.2-5.0A.
Parallel task selection
Select Parallel charging model. Use a one-for-two power cord, with one end
connected to the battery and the other to two output ports of the charger. It
can gather output power in one channel. The battery balance port can be
connected to any balance port of the charger. Match the charger with the power
supply and connect the battery, and select this item in the advanced settings
menu to set the parallel task parameters with recommended charging current is
10-16A.
System Setting Menu
Under the advanced settings menu, select system settings to enter the system
settings menu.
Min. input voltage protection: 10-24V
All tasks in operation will be stopped at once and hint warning of low voltage
when the input voltage is lower than the input voltage as set up. It will
protect the battery from being discharged when using the battery pack as a
power supply.
Max. input power setting: 100-550W
If the input power is smaller than the max working power(500W), please set up
the parameter as the actual output power as max input, to protect the input
power and enable the charger to work stable.
Volume
There are four options for volume setting: high, medium, low, and off. When
set to “Off”, the operation prompt sound will be turned off, but the error
prompt sound will not be turned off.
Automatic split screen
The automatic split-screen setting has three options of 60 seconds, 30
seconds, and off. You can choose to switch from the single-channel parameter
interface to the dual-channel (split-screen) parameter interface automatically
within the set time. You can also select “Off” to turn off the automatic
split-screen function.
System self-test
After removing all battery connections of CH1 and CH2, select this item to
perform the system self-test operation.
Calibration
The input voltage, output voltage, and balance voltage of the charger can be
calibrated with this task.
*All product photos, statements, and literature are for reference only. For up—to—date information,
please visit our official web www. site.co
SHENZHEN ISD TECHNOLOGY CO. LTD ISDT
reserves the right of final explanation and revision for the terms.