ISDT PB40 Power Bank User Manual
- June 17, 2024
- iSDT
Table of Contents
ISDT PB40 Power Bank
- Thank you for purchasing the ISDT PB40 power bank.
- Visit ISDT’s official site www.isdt.co for more details about PB 40 and matching accessories.
- Since the product is constantly updating, this manual may differ from the actual operation.
- Please refer to the actual function.
Warnings and Safety
- To ensure charging safety while offering a better user experience, we insist that you should read these terms before using the product.
- Do not hit hard or put heavy pressure on this product and avoid serious drops or strong vibration.
- It is strictly forbidden to put this product into water or a heat source and make sure that the adapter stays far away from dampness, rain, and heat.
- When this product is deformed, swelled, or leaked, and its durability is significantly reduced, please stop using this product and dispose of its property.
- When the weather is hot, do not leave this product in an outdoor unsupervised car or other places exposed to the sun.
Specifications
- Model: PB40
- Battery type: Lithium-ion battery
- Cell capacity (Rated/Typical): 9506mAh/9800mAh
- Rated capacity: 6500mAh (5V/1A)
- Input/Output port: Type-C1/Type-C2 two-way port
- Input parameters: 5V/3; 9V/2A
- Output parameters: 5V/3A; 9V/2A; 12V/1.5A
- Charging time: about 1.5h(Double USB-C port charging.
- Conversion efficiency: 82%
- Operating temperature: 0-40°C
- Cue tone: Support
- APP connection: Support
- Size: 81x48x26mm
- Weight: 185g (#10%)
Product schematic
LED Indicators
When the power bank is self-charming. LED indicators will flash like
:
- The power bank self-charging, the quicker the charging, the faster the indicators flash.
- The 80% maximum charging power under Battery Care mode determines that 3 indicators on is the signal of complete charging.
When the power bank is charging other devices, LED indicators will flash
like:
Basic Operation
-
This device has no pressed or touched button but a touch area, which can trigger the battery power checking, over the LED indicators.
-
Connecting with the ISDLink APP, you can check real-time charging/discharging power and rename your device, also turn on or off these functions:
Battery Care: Battery maintainance mode
Operation Beep: Cue tone
Touch Key Presses & Hold: Long touch to activate battery checking to prevent accidental touch
Lights Off On Charge Done: Indicators off when charging is complete -
For the Retrieving function, trigger it in the ISD Link APP to make the power bank make a sound, helping you find the missing power bank.
-
You can end the retrieving process by touching the LED indicators area.
-
When the Battery Care mode is running, you can long touch the indicator area till the device beeps 1 time to release this function temporarily, so that this charging process can reach the complete charging of 100%.
- Yet the following changing process will still maintain Battery Care mode unless you turn the option off on the ISDLink APP.
-
When updating the firmware, the LED light indicates a marquee.
Download and Install the ISD Link APP
- Download from Official Site: Reach www.isdt.co and go to the Support-Software page.
- Download by scaning the QR code: Scan the QR Code on the last page, then follow the instructions.
- Click “+” on the upper right corner of the APP surface, then follow the instructions to add the device and get started.
- All product photos, statements, and literature are for reference only.
- For up-to-date information, please visit our official site www.isdt.co.
- SHENZHEN ISD TECHNOLOGY CO.
- ISDT reserves the right of final explanation and revision for the terms.