Baseus 660700224A C+U 30W US Super Si Pro Quick Charger User Manual
- June 6, 2024
- Baseus
Table of Contents
Baseus 660700224A C+U 30W US Super Si Pro Quick Charger
Product Parameter
Name: SU per Si Pro Quick Charger
Material:PC
Model No.: CCCJG30CS
Input: AC 100-240V-, 50/50Hz, 1.2A Max.
Type-C Output: 5V/9V=3A, 12V=2.5A, 12V=2A,20V=l.5A USB output: 5V/9V=Y..,
12V-2.5A, 20V-1.5A
Type-C+USB Output: 18W+ 12W
18W: 5V=2.4A, 9V=2A, 12V=L5A
12W: 5V=2.4A, 9V=l.33A., 12V=l.0A
Product size: 35X30X48.2mm (Without pins)
Product weight: About 64g
The above data are measured by the Baseus laboratory, the actual use will be slightly different depending on the specific circumstances
Packing List
Product Diagram
This product ls a dual-port {Type-C+USB) ?IJW fast charger using a new type of semiconductor material (Super silicon). The maximum output power of the Type-C single port can reach 30W (20Y-l.5A). It is equipped with Baseus’ s leading BPS II power distribution technology. Both ports are fast chargering when used separately. The product supports PD3.0, QC3. O, Apple2.4, BCl.2 and otherfast charging protocols, as well as PD fast charging for most moblle phones including new iP phones, and tablets. The product has built-in multiple safety protection circuits such as overcurrent, overvoltage, and temperature protection.
Use Environment
- Operating environment: non-tropical areas below 2000m above sea level.
- Notto be used in tropical regions.
- Notto be used above2000m.
- Not suitable for outdoors.
Tips
Please read all instructions and warnings before using this product. Non- standard use will damage the product or personal safety.
- Do not store the product in high temperature, strong light and strong magnetic field. Do not place it in other harsh environments such as fire source.
- Improper use of the product can easily cause damage to the product or may endanger personal and property safety.
- Consumer shall be llable for any personal and property damage resulted from their improper use against the user manual or ignoring the warning, to which our company will not bear any legal liability.
- Disintegration of this product by non-professionals is strictly prohibited.
- Use of household appliances or loads in excess of the output current of this product shall be avoided (no output due to circuit protection).
- Intense physical actions including knocking, throwing, trampling on and squeezing, etc. shall be avoided.
Statement on Toxic and Hazardous Substances in Electronic Information Products
Part
Description
| Toxic or hazardous substances and elements 10
---|---
Lead
(Pb)
|
Mercury
(Hg}
|
admium
(Cd)
| Hexavalent
chromium (CrVD)
| Polybrominated biphenyls
(PBB)
| Polybrominated diphenyl ether (PBDE)
PCB| X| 0| 0| 0| 0| 0
Plastic| 0| 0| 0| 0| 0| 0
Metal| X| 0| 0| 0| 0| 0
Accessory| 0| 0| 0| 0| 0| 0
This form 1s comp1led in accordance with SJ/T 11364.
O: It indicates that the content of the toxic and harmful substance in
all homogeneous materials of the component is below the limit specified in
GB/T 26572 standard.
X: The content of toxic and ham1ful substances in at least one
homogeneous material of this part exceeds the limitstipulated in GB/T 26572
standard.
This Product complies with EU Ro HS 2.0 Directive ( 2011 / 65 / E U )
Icon Description
The 10-year icon refers to the “effective life of environmental protection”, not the product quality assurance period. Electronic products all contain toxic and harmful substances such as lead, mercury and cadmium. Once they are overused, toxic and harmful substances may leak or mutate, cause pollution to the environment, or cause serious damageto people and property.
The term of “environmental protection use• means that all electronic products will be required to use within this effective period. We will no longer be responsible for the quality of the products due to the safety risks that arise after the safe use period.
This device complies with part 15 of the FCC Rules. Operation issubjectto the following two conditions: (1) this device may not cause ham1ful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be detem1ined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Shenzhen Times Innovation Technology Co., Ltd.
Add: 5th Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd,
Gangtou Community, Bantian Street, Longgang District, Shenzhen Manufacturer:
Shen Zhen Heincro Technology Co. Ltd.
Manufacturer address: 22F, BC Building, 3# of Shayuan 1st Rd, Keyuancheng,
TangXia Town, Dongguan City, China
Executive Standard: Q/SSCZ009-2019
Hotline: +86-4000-712-711
Website: www.baseus.com
Copyright©2010-20
Warning: Please follow the above safety instruction so therwise it will cause fire,electric shock, damage or other damage.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>