INVENTUM ST307ZZA Vacuum Cleaner Instruction Manual
- June 6, 2024
- INVENTUM
Table of Contents
INVENTUM ST307ZZA Vacuum Cleaner
safety instructions
-
First carefully read the instruction manual in full prior to using the appliance and store the manual in a safe place for future reference
-
Only use this appliance for the purposes described in the instruction manual.
-
This appliance is only suitable for household use.
-
The appliance may be used by children of 8 years and older and persons with a limited physical, sensory or mental capacity or lack of experience or knowledge, provided they use the appliance under supervision or have been instructed about its safe use and understand the hazards involved.
-
Children must not play with the appliance.
-
The appliance may not be cleaned or maintained by children younger than 8 years of age, unless this is done under supervision.
-
Keep the appliance and cable out of reach of children younger than 8 years of age.
-
Strict supervision is required if the appliance is used by or near children.
-
Keep hands, feet, loose-fitting clothes, hair and animals out of reach of the rotating brush. This is to prevent injury to skin, eyes or ears, for example.
-
This appliance is intended for household and similar use, such as:
- in staff kitchens, shops, offices and other work environments;
- by guests of hotels, motels and other residential environments;
- in Bed&Breakfast type environments;
- farms.
-
Caution : the appliance may not be used with an external timer or a separate remote control.
-
Only connect the appliance to alternate current, to an earthed wall socket, with a mains voltage that corresponds with the information provided on the information plate of the appliance.
-
Never bend the power cord sharply or allow it to run across hot parts.
-
Do not use the appliance if the plug, cord or appliance are damaged, or if the appliance no longer functions properly or if it is damaged in any other way. In that case, consult the shop or our customer service. Never replace the plug or cord yourself.
-
The use of accessories not recommended or sold by Inventum may cause fire, electrical shocks or injuries.
-
The brush and vacuum cleaner were specially designed for us on carpets and hard floors. In rare cases, and depending on the type of floor, it is possible that scratches are made in the surface to be cleaned. Inventum is not responsible for any damage made on the floor. If necessary, a special parquet brush is available via the Inventum webshop.
If the appliance is not being used or if parts or accessories must be mounted or removed or if the appliance is being cleaned, fully switch off the appliance and remove the plug from the socket. -
Do not leave the appliance unattended when it is in operation.
-
Never place the appliance near appliances that give off heat, such as ovens, gas cookers, hotplates, etc.
-
Do not use the appliance outdoors or on a wet surface and do not use it for picking up moisture.
-
Do not pick up lightly flammable materials.
-
Do not pick up burning materials such as cigarettes, matches or ash.
-
Always make sure the appliance is placed on an even, flat surface and is only used indoors.
-
Do not stand on the cord while using the appliance.
-
Ensure that the cord cannot wrap itself around arms or legs during use.
-
Do not use the appliance for cleaning animals or people.
-
If the appliance is not used as intended or if the instructions in the manual are not observed, no compensation can be claimed in case of defects or accidents and the warranty will be invalidated.
-
Correct installation and maintenance of the motor filter, Hepa filter and dust bag in accordance with the instructions in the manual is necessary to prevent defects in the appliance. In case of defects caused by incorrect use or not placing the dust bag and filters, the warranty becomes invalid.
-
Always pull the entire cord out of the appliance when it is being used for more than 30 minutes at a time, to prevent the cord from overheating.
-
Never submerge the appliance, cord or plug in water.
-
Make sure that children are unable to touch the cable or appliance.
-
Do not allow the cable to run over sharp edges, hot components or other sources of heat.
-
Do not pull the cord and/or appliance to remove the plug from the wall socket. Never touch the appliance with wet or damp hands.
-
If you decide to cease using the appliance due to a defect, we recommend cutting off the cord after removing the plug from the wall socket.
-
Small household appliances do not belong in the dustbin. Take them to the waste processing department concerned of your municipality.
product description
- Handle
- Hose connection
- Dust bag full indicator
- Knob to set the suction power MIN – MAX
- On/off pedal
- HEPA filter – under the grille
- Cord winding system
- Pedal for automatic cord winding
- Hose
- Handle
- Slider for additional suction power control
- Snap-on system for connecting the tube to the hose or disconnecting it
- Slide button to adjust tube length
- Telescopic tube
- Floor nozzle with button for retracting and extending the brushes
- Handle of dust bag compartment cover
- Storage compartment for accessories
before first use
Follow these instructions when using the vacuum cleaner for the first time:
Carefully remove the vacuum cleaner from the packaging and remove all traces
of packaging from the device and any promotional stickers. Keep the packaging
(plastic bags and cardboard) out of the reach of children. After unpacking the
vacuum cleaner, check the device for external damage that may have occurred
during transport. Place the vacuum cleaner on a secure, dry and level surface.
assembly
Make sure the vacuum cleaner is unplugged before (dis)assembling any parts.
HOSE
Connecting the hose to the appliance: insert the hose end into the hose socket
at the front cover and then lock it by turning it clockwise until you hear a
click. Disconnecting the hose from the appliance: make sure the vacuum cleaner
is unplugged. Turn the hose end counter clockwise to disconnect it from the
appliance.
TELESCOPIC TUBE
- Connect the handle of the hose into the telescopic tube until it clicks.
- Set the telescopic tube to the desired length. To do this, pull the slide button upwards and pull the top part of the tube out of the bottom part to make it longer. Release the slide button and let the tube snap into place.
- Attach the floor nozzle by firmly sliding the tube into the nozzle.
- Disconnect the hose from the tube press the button of the click system and pull the hose handle out of the tube.
ACCESSORIES
Connect the different nozzle tools to the tube or the handle of the hose for different cleaning purposes by firmly sliding the handle into the nozzle.
- Round nozzle: can be used to clean furniture, corners of the sealing and blinds
- Upholstery nozzle: can be used to clean matrasses, seats of chairs and pillows
- Crevice nozzle: can be used to clean corners and tight areas which cannot be reached with the combi-brush
- Parquet brush: the parquet brush is provided with real natural hair. The long soft hairs prevent scratches on the floor. The parquet brush is suitable for parquet floors, laminate or wood floors and all other smooth and hard floors.
use
Check that the voltage stated on the device’s information plate matches the voltage used in your region.
TURNING THE VACUUM CLEANER ON
- Place the vacuum cleaner on a dry and level floor.
- Pull out the cord by the plug and insert the plug into a power socket.
- Turn the vacuum cleaner on by pressing the on/off foot pedal .
- Depending on the surface you want to vacuum, you can adjust the suction power. Turn the suction power button left or right in between the min and max indicators. Minimum power level: for delicate materials Medium power level: furniture, carpets and matresses Maximum power level: tiles, wood or other hard floors
- Depending on the type of floor you want to vacuum, you can adjust the floor nozzle. For cleaning hard floors, make sure the brushes in the floor nozzle are down. For cleaning carpeting or a carpet, make sure that the brushes in the floor nozzle are retracted. When it is hard to move the brush over the surface you can decrease the suction power with the button to set the suction power min – max or open the the additional suction power control on the handle of the hose.
TURNING THE VACUUM CLEANER OFF
- Turn the vacuum cleaner off by pressing the on/off foot pedal .
- Unplug the vacuum cleaner, hold the plug and automatically rewind the cord by pressing the cord rewinding foot pedal . Guide the cord with your hand to prevent possible damage. The power cord will be drawn in the vacuum cleaner.
maintenance
Check the hose, dust bag and filters regularly to prevent any problems. If the hose is clogged, empty it. Replace the dust bag when it is full and clean or replace the filters when they are dirty.
DUST BAGS AND FILTERS
The disposable dust bag and the motor filter play an important part in the
efficiency of the vacuum cleaner. The dust bag is for capturing the dirt, but
the motor filter needs to be porous enough to allow air to pass through at the
same time. When the dust bag or motor filter is clogged, no air can pass
through the cleaner and the vacuum cleaner will not clean, regardless how
powerful the unit is. Therefore change the dust bag frequently and replace the
motor filter every four dust bags, to ensure the vacuum cleaner to operate at
maximum efficiency. The air flow can be restricted very quickly by some fine
particles and will decrease the performance even before the dust bag appears
to be full. Therefore, the dust bag and motor filter may need to be changed
more often when vacuuming carpet cleaners, powder, plaster dust or other fine
substances.
REPLACING THE DUST BAG AND REPLACING THE MOTOR FILTER
Make sure to turn off and unplug the vacuum cleaner before replacing the dust
bag or the motor filter. Do not use the vacuum cleaner without a motor filter
or dust bag.
- Change the dust bag when the full dust bag indicator turns red or when the dust bag appears to be full.
- Open the dust bag compartment by pushing the clip upwards and lift the lid.
- The motor filter [1] should be replaced every four dust bags. Take out the motor filter by sliding it upwards. Now you can replace it with a new one.
- Slide the full dust bag carefully out of the dust bag frame [2] and dispose of it.
- Slide a new dust bag [3] in the dust bag frame.
- Close the dust bag compartment and push the lid back into place. The opening of the dust bag is automatically pushed into the right position when closing the lid. The lid of the dust bag compartment cannot be closed if the dust bag is not in place. If the lid cannot be closed, replace the dust bag again according to the instructions.
CLEANING OR REPLACING THE HEPA FILTER
The HEPA filter cleans the air one last time before it leaves the vacuum
cleaner. Clean the HEPA filter at least once per six months or when it is very
dirty. Replace a damaged HEPA filter with a new original HEPA filter.
- Open the grid [4] that covers the HEPA filter by pushing the clip.
- Pull the clip back and take out the HEPA filter [5].
- Rinse the HEPA filter under lukewarm water and let it air dry completely. Do not use any cleaning agents or brushes.
- Put the HEPA filter back into place, when dry, or replace it by a new one.
- Replace the grid. Make sure that the grid is properly placed.
Attention
- Use the vacuum cleaner only when the filters and a dust bag are in place. If not, it can lead to loss of suction power or damage to the motor. .
- Unplug the vacuum cleaner before cleaning or replacing the filters.
- Torn filters or filters that do not fit properly can cause damage to the engine. Replace a damaged filter by an original new one.
- Do not clean the filters in a dishwasher.
- Do not use a hair dryer to dry the filters.
STORAGE
The vacuum cleaner can be stored in two ways. At the back – parking position – or at the bottom, uses less space.
- Rewind the cord by pressing the cord rewinding foot pedal .
- Push the slide button on the telescopic tube upwards and push the telescopic tube together to make it shorter. Release the slide button and let the tube snap into place.
- Slide the floor nozzle in the attachment at the back of the device – parking position – or place the vacuum cleaner upright and slide the floor nozzle in the attachment [6] at the bottom of the appliance.
frequently asked questions
Problem | Possible cause | Solution |
---|---|---|
The suction has decreased. | The dust bag is full. | Remove the full dust bag |
and place a new one.
The filters are clogged.| Replace the motor filter for a new one or clean the
HEPA filter according to the instructions.
The button for the suction power is not set to max or the extra suction
power control on the handle is open.| Set the suction power to maximum or
close the control for extra suction power on the handle of the hose.
It is hard to move the brush over the surface.| The suction power is set too
high.| Decrease the suction power or open the extra suction power control on
the handle.
The button on the brush is set on the wrong setting.| Make sure the brushes
are retracted on carpet. Make sure the brushes are down on a hard floor.
The vacuum cleaner makes more noise.| The tube or hose is clogged.| Disconnect
the tube and the hose and empty them.
The motor filter or HEPA filter is clogged.| Replace the motor filter.
Clean or replace the HEPA filter.
The dust bag is full.| Remove the full dust bag and place a new one.
The dust bag compartment cannot be closed.| There is no dust bag in place or
placed incorrectly.| Place the dust bag (again) according to the instructions
and close the compartment.
References
- Inventum Huishoudelijke Apparaten - Altijd 5 jaar garantie!
- Inventum Huishoudelijke Apparaten - Altijd 5 jaar garantie!
- Klantenservice
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>