LEZII BT525 Bluetooth Speaker Instruction Manual

LEZII BT525 Bluetooth Speaker

Product Diagram

Kind reminder: Tips: with radio function BT525-FM / without radio function BT525

Compound key

(PowarOn/ PowerOff/ Play/ Pause/Call/

Switch Mode)

| 1). Long press the compound key for 2 seconds to turn it on.

It will try to connect the last device that has been connected before after the power Is on. If the connection falls,

It will enter the pairing state automatically.

---|---
2).When the power is on, long-press the compound key for 2 seconds to turn it off.
3). While playing music via a wireless connection or TF card, press once to pause, press again to play.

4). Under the AUX mode, press once to mute, press again to un-mute.

5}. Under any state (phone-call state as the only exception), double click to switch mode.
6). Press the compound key when there Is an Incoming call to answer It. Press the compound key ln the middle of a phone call to hang it up.
| 7).ln the TF mode, triple-cllck the compound key to play the next folder.
---|---
8). Double-click the compound key when there is an incoming call to reject it.
9).ln the radio mode, triple-click the compound key for auto-search. Cilek on the compound key to mute, and cllck again to un-mute.

Previous track/

Volume Down

| 1). Underplay mode via a wireless connection or TF card, long-press the Volume Down key for 2 seconds for the previous track.
2). Under the radio mode vie AUX, wireless connection or TF card, press the Volume Down key to turn down the volume.
3).Under AUX mode, the long press Volume Down key is functionless.
4). Under the radio mode, long-press the Volume Down key for the previous channel.

(ps.BT525 does not have this function)

Next Track/

Volume Up

|

1). Underplay mode via a wireless connection or TF card, long-press the Volume Up key for 2 seconds for the next track.

2). Under the radio mode via AUX, wireless connection or TF card, press the Volume Up key to turn up the volume.

3). Under AUX mode, long press Volume Up key ls functionless.

4). Under the radio mode, long-press the Volume Up key for the next channel.

(ps.BT525 does not have this function)

4. Indicator light               5. Microphone                        8. TF card slot

7. Compound key             8. USB charging port            9. AUX audio output port

OPERATING GUIDE

Play music via connection

| Open the wireless connection function on your mobile phone, tablet or other devices, search for the device name

“BT525-FM/BT525” and cllck to pair. There wlll be a music prompt tone if it is successfully connected. Then go back to the music play interface and play the track you’ve chosen.

---|---
2.

Answer phone calls

| When the wireless connection is successfully paired, if there is an Incoming call, press the compound key to answer lt, press again to hang It up, and double-press the compound key to reject It.
3.

Power charging

| 1). When the battery of the speaker is low, there will be an alarm tone and the speaker will be shut down automatically in about 5 minutes.

2). The red indicator light is on while charging, and is off if it is fully charged.

(Note: please long press the compound key to tum it off when charging)

TWS

| 1). Get two devices and long-press the compound keys on them at the same time to turn them on. Then triple-click on the compound key of anyone until there is a beep, which indicates

the two devices are paired. When playing music, the one with a

flashing blue light Is the master device, while the other with a constantly shining blue llght Is the auxiliary device.

2). Open the wireless connection on your mobile phone and search BT525-FM/BT525 to pair.
3).lf they are successfully paired, when playing music, triple-click on the compound key on either device to disconnect TWS, and TWS wlll pair and play again if triple-click on the

compound key on the device which is currently playing.

4.The master device is the only that is capable to communicate during phone calls.

| cl n

l

2. Short press the “composite keyn once to mute, and short press the composite keyn again to restore the receiving function.

SPECIFICATIONS

PRODUCT WARRANTY

CERTIFICATE

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirement.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>