TESVOR X500 Robot Vacuum Cleaner Instruction Manual

TESVOR X500 Robot Vacuum Cleaner

TESVOR X500 Robot Vacuum Cleaner

Charging modes

Please keep the power switch turned on before charging the machine. Charge mode Fix the charging pin into the DC power jack of the robot and plug in the power supply.

Please keep the power switch turned on before charging the machine. Press the Return for Auto charging button on the remote controller or Press the Recharge icon on App to auto dock the Robot with the charging base.

Automatic charging

Pressing the Return for Auto Charging on the remote controller to make the robot return for charging. When Cleaning is completed or the battery is too low,the robot will automatically start finding the charging base to charge itself.
Pls, keep the charging base energized, otherwise the machine will not be able to find the charging base.

Charging instructions

1.  The battery should be repaired and replaced by the after-sales service center.
2.  For the very first operation, please let the robot run out of power.
3.  When the robot is charged, the LED light of the Control button will flash.
4.  lf the robot is out of service for a long time, please turn off the power switch.
5.  Please charge the robot as soon as possible after the battery is used up.
6.  The product can only use the power adapter and charger provided by the factory.
7. Please charge the robot for 12 hours for the first time of operation. When the charge is done, the Control button light turns off.

switching Modes

Startup

1. Make sure the power switch on the side of the robot is turned on.
2.  Press the Control button or the Cleaning mode on the remote controller to start the robot.

Pause
The pause function is to switch the robot from the operating mode to the selected mode,and the robot can be paused by the following operations:

1. Press the Control button on the robot to pause the robot.
2.  Press the power on/off button on the remote controller to pause the robot.

Notice:
After the machine is paused, the machine can be reoperated.

Sleep
Sleep mode means that the robot is stopped and the indicator light is off.If the Robot is not active within 10 minutes, the robot will enter Sleep mode automatically.

Note:

If the robot is out of service for a long time, please turn off the power switch.

Use of Water Tank

When charging, please remove the water tank to avoid danger.

How to add water?
Open the tank sealing cap, fill it with enough water and slowly inject water into the water tank.

When charging, please remove the water tank to avoid danger.

How to fix the microfiber mop?
Seal the tank sealing cap, then fix the microfiber mop to the velcro on the bottom of the water tank.

When charging, please remove the water tank to avoid danger.

How to install the water tank?
Press the release button on the dust box to remove it then install the water tank.

Schedule Setting Cleaning

You can set the current local time on your robot by pressing the Clock Setting button on the remote controller,then pressing Confirm button.

• Once the power switch is turned off, all Schedules will be canceled.
• Once the schedule setting is succeeded,the robot will start working at the scheduled time every day Press the”Schedule Setting” button to set the scheduled cleaning time for the robot.(e.g. Setting 6:30am to the robot, the robot will start cleaning at 6:30 am every day at standby mode.).
• Press the”Schedule Setting” button to set the scheduled cleaning time for the robot.(e.g. Setting 6:30 am to the robot, the robot will start cleaning at 6:30 am every day at standby mode.)

1.  Press the Schedule Setting button to enter the Schedule Setting mode and set the schedule on the remote controller or APP.
2.  If you need to cancel the schedule, just press the Schedule Setting button for 3 seconds.

Cleaning Modes

Plan Cleaning (S shape Cleaning)
The robot will perform the smart plan cleaning in S shape according to the room environment.

Edge Cleaning
The robot will clean along with the longest edge of the room.

Spot cleaning
The robot will perform concentrated cleaning on a special dirty area. (APP controlled only)

Mopping Mode
The Robot will perform the S shape cleaning with mop according to the room environment.

• Please do not move or remote control the robot while it is working,or it will replan the cleaning route and repeat cleaning.
•  There is a normal phenomenon that the robot will perform with a brief pause during working. Please be patient,as it is thinking and making decisions or discovering where to clean.

Side Brush Cleaning and Replacement

Check the side brush’s condition frequently to see if it has been damaged or entangled with other objects. Clean the side brush with a cleaning tool or cloth. When the side brush is damaged and can not be used,please replace it as soon as possible. L and R correspond to each other.

Cleaning of Dust Box and Filter

Press the release button to take out the dust box.

Dump all debris form the dust box into the garbage.

Remove the pre-filter.

Open the high-efficient filter cover, and remove the high-efficient filter and filter sponge. It is not recommended to wash the high-efficient filter with water. Please pat off the debris carefully.

Wash the dust box and pre-filter.

1. Dry the dust box and filter components. Keep them dry to ensure a longer service.

2. After the pre-filter is used for 15~30 days, it should be washed once.

3. The maximum service life of the high-efficient filter is 3 months.

4.  Reinstall the pre-filter and high-efficient filter in the dust box.

5.  Before installing the filter, make sure that the high-efficient filter and the pre-filter are dry.

6.  Do not expose the high-efficient filter and the pre-filter to sunlight.

Cover the dust box and fix it into the main body.

Maintenance of Water Tank

Press the release button to take out the water tank.

Remove the mop.

Wash and dry the mop.

Pour out the rest of water from the water tank.

Clean the tank and dry it.

Maintenance of Rolling Brush Components

Open the rolling brush components.

Remove the rolling brush and clean off all debris and hair.

Maintenance of Other Components

Use the cleaning tools or a dry soft cloth to periodically clean the electrode slice of robot chassis and the sensor window.

Use the cleaning tools or a dry soft cloth to periodically clean the electrode slice of robot chassis and the sensor window.

Faults Description

The robot can not be charged.

| The electrodes between the main body and the charging base are not contacted properly.| Make sure that the electrodes between the main body and the charging base are properly contacted.
The charging base is switched off while the robot is switched on,which leads to the loss of power.| Keep charging the robot when it is not working to better prepare for next cleaning assignment.
The robot is stuck during work.| The robot may be stuck by wires/ca- bles on the ground,hanging curtains or obstacles around the carpets.| The robot will try to get itself out automatically.However,please help it manually if it failed.

The robot goes back to recharge without finishing the cleaning work.

| The robot detects that the power may be not enough and automatically goes back to recharge.|

Charge the robot.

The robot works at different speeds on different floor types.For example,it works longer on the wood floors than

on carpets.

| The length of working time varies because of the complexities of room environments,the amount of garbage and different cleaning modes.

The robot does not perform cleaning work automatically as scheduled

| The robot is not switched on and the robot can not perform cleaning work as scheduled when it is powered off.| Turn on the robot.
The power level of the robot is too low to work.| Keep charging the robot when it is not working to better prepare for next cleaning assignment.

The robot is stuck or twined by obstacles.

| Turn off the robot and clean the dust box.Then turn over the robot to clean its components,such as wheels and

side brushes.

Remote control malfunctions (effective range is 5 m)

| The remote controller is short of or out of power.| Change the batteries and install the batteries correctly.
The robot is short of or out of power.| Make sure that the robot is switched on with enough power for operation..
The infrared ray is blocked because the infrared emitter on the remotecontroller or the infrared receiver in the robot is contaminated.| Wipe the infrared emitter on the remote controller or the infrared receiver on the robot with a clean cotton cloth.
Interference emitted by other devices that exist nearby.| Avoid using the remote controller near other infrared devices.

When the robot is working, there is a missed sweep, the route is chaotic, the deviation is reversed,and the APP side cleaning map shows irregularities and is not neat.

|

The drive wheel and the ground may slip due to the robot climbing small steps, thresholds and door bars, thus affecting the its judgment on the working environment of the whole house.

| It is recommended to close the door in the area and clean the area separately. The robot has the function of self-identification single room. It will return to the starting.
Work on a waxed, polished floor or smooth floortile, resulting in reduced friction between the drive wheel and the ground.| It is recommended that you clean the floor after the wax is air-dried.
The wires, slippers, etc. placed on the ground affect the normal operation of the robot.| Before the machine is working, please arrange the scattered wires, slippers and other objects on the ground to minimize the scattered objects on the ground.

Replaceable Modules

Application:

The product is suitable for cleaning house, hotel rooms, and small offices and provides good cleaning for various floors, such as the wooden floor,hard floor,tile floor, and short-pile carpets(short-pile should be shortened than 1.5cm),etc.

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•  Consult the dealer or an experienced radio/TV technician for help.

RF warning for Mobile devices:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>