ARMEATOR One Smart Wireless BBQ Thermometer User Manual

ARMEATOR One Smart Wireless BBQ Thermometer

Product Information

Specifications:

• Material: SUS304 Food Safety Dock with ceramic components
• Power Source: 2 AAA batteries
• Temperature Range: 0~100°C / 32~212°F
• Ceramic Cap Heat Resistance: Up to 500°C / 932°F
• Compatibility: iOS 11.0 or later, Android 5.0 or later with Bluetooth 4.0 or later

Product Usage Instructions

Device Activation and Setup:

1. Insert 2 AAA batteries into the battery cover ensuring correct polarity.
2. Download and install the ‘ToGrill’ app from App Store or Google Play.
3. Launch the app and follow the on-screen instructions to activate the device.
4. Scan the QR code on the charging dock to pair the probe with your phone.

Using the Probe:

• Avoid direct exposure of the probe needle to fire flame.
• Ensure the probe is clean before each use to prevent dust and oil buildup on the charging electrode.
• Insert the ceramic cap end of the probe into the meat for accurate temperature readings.

Charging and Power Status:

• Monitor the LED indicators on the charging dock for charging status.
• White LED indicates sufficient power, while red LED indicates low power.
• Ensure proper alignment of the charging electrodes for effective charging.

Get to know the device

2AAA size batteries are needed for this charging case.Make sure they are put in the right direction on the unit.

Download the APP

Search the keyword ‘ToGrill’ in Appstore or Google Play or scan the following QR code with your phone.
Download and install it for free.

Make sure your phone meets the requirements:
iOS devices running version 11.0 or later.
Android devices running version 5.0 or later with blue-tooth 4.0 module or later.

Activate probe and pair with your phone

1. Switch on your device and keep the blue-tooth switch of your phone on.

2. Activate device：

   • Launch the ‘ToGrill’ app,
   • Enable mobile phone permissions
   • Follow the instructions in the app to activate the device
     Use ToGrill APP to Scan
     Scan the QR Code at back of the charging dock or right.

3. Pairing：Chose the probe you have on app

4. Connected successfully.

Once Paired the probe with your phone,you don’t need to do it again,unless you change to other phones.

Enjoy your barbecue time

Choose food type and preference for the food where each probe is inserted,the app and the device will display its current and tagert temperature.
When the food is ready, the app and the device will alarm.

WARNING
The heat resistance varies in different components of the probe,DO NOT put the probe needle part directly in fire flame.
And probes are NOT dishwasher safe.

Attention: Temp Probes above for reference only,subject to the actual probes.

Operation is subject to the following two conditions:

1. This probe may not cause interference;
2. This probe must accept an interference, including interference that may cause undesired operation of this device.

App Store is a service mark of Apple Inc.

Google Play is a service mark of Google Inc:

FCC Statement

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The device has evaluated to meet general RF exposure requirement. The device can be used be in portable exposure without restriction.

IC Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Frequently Asked Questions (FAQ)

Can I wash the probes in a dishwasher?

No, the probes are not dishwasher-safe. Clean them manually with care.

What is the heat resistance of the ceramic cap?

The ceramic cap can withstand heat up to 500°C / 932°F.

How do I know if the probe is fully charged?

The charging status LED will turn off when the probe is fully charged.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>