COSTWAY JV10671 Dog Crate Instruction Manual
- May 15, 2024
- COSTWAY
Table of Contents
Dog Crate
Caisse pour Chien
JV10671
JV10671 Dog Crate
THIS INSTRUCTION BOOKLET CONTAINS
IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
**** Before You Start
Please read all instructions carefully.
Retain instructions for future reference.
Separate and count all parts and hardware.
Read through each step carefully and follow the proper order.
We recommend that, where possible, all items are assembled near to the
area in which they will be placed in use, to avoid moving the product
unnecessarily once assembled.
Always place the product on a flat, steady and stable surface.
** Keep all small parts and packaging materials for this product away from
babies and children as they potentially pose a serious choking
hazard.
Install the “ A ” three-in-one on the
(1.6.7) panels.
Fix H to 4 and
5 with C.
Connect 3 and 5
with D.
Connect 3 4 5
with D according to the drawing
Connect 2 3 4 5 with D according to the drawing.
Notice: Before installing G , put the wire
through the hole on the backplane. Step 1. First snap the wire into the
slot of the part K.
Step 2. Remove the sticker from the part K.
Step 3. Stick the part K to the back of the panel 1.
Connect 1 2 3 4 5 with B according to the
drawing.
Connect 1 2 3
4 5 6 with B and D according to the drawing.
According to the drawing,Connect 8 9 10 with D ,then insert
11 into the notch.
Assemble
the 7 8 9 10 11 and fix it with B.
Assemble according to the drawing,Fix H on the drawer with C
.
11.1 Put the
drawer on the cabinet.
11.2 Install G on the cabinet.
12.1 Fix F 1 and F 2 to plate 6 with F 3 .
12.2 Install E onto the cabinet as shown in the figure
Notice:** When charging the mobile phone
wirelessly, place the mobile phone in the center of the lightning symbol of
the charger.
**** Return / Damage Claim Instructions
DO NOT discard the box / original packaging.
In case a return is required, the item must be returned in original box.
Without this your return will not be accepted.
Take a photo of the box markings.
A photo of the markings (text) on the side of the box is required in case a
part is needed for replacement. This helps our staff identify your product
number to ensure you receive the correct parts.
Take a photo of the damaged part (if applicable).
A photo of the damage is always required to file a claim and get your
replacement or refund processed quickly. Please make sure you have the box
even if it is damaged.
Send us an email with the images requested.
Email us directly from marketplace where your item was purchased with the
attached images and a description of your claim.
USA office: Fontana
AUS office: Truganina
GBR office: Ipswich
FRA office: Saint Vigor d’Ymonville
If you’re having difficulty, our friendly customer team is always here to help.
USA:[email protected]
AUS:[email protected]
GBR:[email protected]
FRA:[email protected]