Pusiou PS-161 Power Bank User Manual
- June 14, 2024
- Pusiou
Table of Contents
Pusiou PS-161 Power Bank
Thank you for purchasing our product. In order for you to use this product safely, please read the instructions carefully before use, and keep this manual for future use
Schematic
- OUT1
- OUT2
- Micro
- Type-C
- OUT3
- OUT4
- LED power indicator light
- 33 LED lights
- Wireless Charger
- Solar panel
- Switch button
Prsoet Specification
- Product Mod el: PS-161
- Battery Type : Li-Polymer
- Input(Micro): 5V / 2.0
- Input(Type-c): 5V / 2.0A
- Solar Charging :5.5V/250mA
- Out Power :10W(Max)
- Output(OUT1) :5V / 2.1A
- Output(OUT2) :5V / 2.1A
- Output(OUT3): 5V / 2.1A
- Output(OUT4): 5V / 2.1A
- Charging Time: About 12 hours
- Working Temperature:0 °C-50°C
- Product Size: L6.53 x W3.22 x H1.29(IN)
- Product weight: ≈520g
Instructions for use
- LED lights on / off operation method
- A. In standby mode, double-click the LED flashlight switch continuously to enter bright mode.
- B. Press the button again to enter SOS mode.
- C. Press the button again to enter burst flash mode.
- D. Finally, double click the switch to turn off the LED flashlight.
- LED lighting function
- Press the power switch twice continuously, the LED light on the back will light up.
- Each time you press the switch, the mode will switch from strong to weak to flashing (SOS).
- Press the switch twice continuously, the light will go out.
- Press and hold the switch in the lighting mode can turn off the light and turn off the power of the unit.
LED light status display
- Press the power switch button shortly to show the power status. The four LED power indicators indicate the battery status:
Product charging
(01) Use the adapter to charge this product
You can charge the product using the power adapter. The current product level
indicators flash until the four LED lights are lit indicating the product is
fully charged.
Charging via a wall plug should always be used as the main charging source.
Use sunlight to charge this product
Place the product’s solar panel in the direction of vertical sunlight (avoid
high temperatures, because this could damage the battery), or in an
environment with sufficient light. You can use the sunlight to charge itself
without any key operation. The indicator light is always blue, and the four
LED power indicator lights are always on after the battery is fully charged.
The solar charging should only be used for emergency power. If you can, use
the wall plug.
Please Note: The output power of a solar panel depends on factors such as solar irradiance and solar panel temperature, and is limited by natural conditions such as day and night, season, geographic latitude and altitude, and random factors such as sunny, cloudy, cloud, and rain. The irradiance of the sun reaching a certain ground is both intermittent and unstable. When the solar panel is facing the sun, the time is between 10 am and 3 pm, the atmospheric mass is AM1.5, and the light intensity is 1000W/ m2 The temperature is 25℃. Under this condition, the maximum power output by the solar panel is also called the peak power.
Charging your devices
Charging products such as smartphones, tablets, cameras or MP3
This product has 4 USB output ports . The cell phone can be connected to any
one of the output ports using a USB data cable. The LED battery indicator
lights up and the mobile phone device is charging. When the device is fully
charged, the power bank automatically switches off to save battery.
Supports wireless device charging, place your phone on the wireless panel to charge your device
Prsoet Specification
- For the first use, please fully charge the product.
- If the product has abnormalities such as battery expansion, leakage, deformation, water immersion, or short circuit, stop using it immediately.
- Do not drop or use this product in a high-temperature, humid, strong magnetic environment.
- Keep this product out of the reach of children.
- Do not leave this product in the car, the closed temperature environment will cause damage to this product.
- When charging is completed, please unplug the connection line in time to avoid loss.
- When the product enters the protection state due to a short circuit, over-discharge, etc. (the performance is that the product has no output), it can be reactivated by shortly pressing the switch button. If it is invalid, please connect to the external power adapter for charging to recover.
- Do not use an all-in-one data cable to charge multiple devices at the same time to prevent damage to the devices.
- This product has a built-in over-temperature protection function. When the ambient temperature exceeds the normal use temperature range, over-temperature protection may occur. At this time, just move the product to the normal use temperature environment and click the button to restore the output.
- If the mobile power supply is not used for a long time, over-discharge may occur. In order not to affect the performance of the mobile power supply, please fully charge and discharge the mobile power supply at least every 3 months.
Warning:
This product contains lithium-ion batteries the unauthorized open shell
product, to avoid possible damage caused by cell or other hazards Never
disassemble, crush, puncture, short product, or fire or exposed to
temperatures above 60°C environment, to avoid fire hazards.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>