suddenlink TG1672 Telephony Gateway Instruction Manual
- June 6, 2024
- suddenlink
Table of Contents
Suddenlink TG1672 Gateway
These instructions will guide you through installing or replacing a Suddenlink Gateway
Disconnect everything from
your existing equipment.| Connect the open end of your
coaxial cable to the back of the
new Gateway.| Plug the Gateway power cord
into the back of the device.| Plug the other end of the power
cord into an electrical outlet.
The Gateway is ready for the
next step when the top 3 lights
on the front panel are solid
blue. This may take a few
minutes.| Once you’ve connected
and powered on your new
Gateway, call 888.570.4702 to begin the activation process.| Connect to the
WiFi Network
shown on the label on the
side of your Gateway. Your
password will be listed as the
”Pre-Shared Key.”
To personalize your in-home
network name:
+ Enter 192.168.0.1 into the
the address field of your browser.
+ Login as “admin” and enter
“password” in the password
field.
+ Find your network name on
the Basic Settings tab and save
your changes.| To connect to the Internet, go
to WiFi settings on your device.
Select your in-home WiFi
network name from the list
and when prompted, enter
your password.
Repeat this step for all of your
connected devices.
Rather use your own WiFi router? Connect to your network as shown in Step
7, then visit suddenlink.com/usemyrouter
for details.
Make sure to return your old equipment. Learn how at
suddenlink.com/returns
Suddenlink is a registered trademark of Suddenlink
Communications, a subsidiary of Altice USA,
Inc. © 2020 Suddenlink Communications.
COL0121SDL1672
References
- Equipment Return Instructions | Suddenlink
- Using your own router with the Gateway TG1672 | Suddenlink