ECOFLOW MR500-CC EV X-Stream Adapter Owner’s Manual

ECOFLOW MR500-CC EV X-Stream Adapter

Product Information

The EcoFlow DELTA Pro EV X-Stream Adapter is designed to work with different types of charging connectors:

• J1772 (Type 1) for U.S./Japan
• Mennekes (Type 2) for the European region
• GB/T for the Chinese region

Specifications:

• Model Number: EFD500-CC
• Maximum Input/Output Power: 3400 W max
• Input Voltage: 100-240V, 50/60 Hz

How to Connect:

Tip:
Pay attention to aligning the connector locations when connecting.

Safety Tips:

• Make sure that the EV charger, DELTA Pro EV X-Stream Adapter, and the Infinity Port are inserted into place before use.
• Avoid allowing the product to come into contact with any liquid. Do not immerse the product in water or get it wet.

Product Usage Instructions

1. Ensure the EV charger, DELTA Pro EV X-Stream Adapter, and Infinity Port are properly connected.
2. Insert the appropriate charging connector based on your region (J1772, Mennekes, or GB/T).
3. Connect the adapter to a power source with the specified input voltage (100-240V, 50/60 Hz).
4. Once connected, you can now use the adapter to charge your electric vehicle.

Frequently Asked Questions (FAQ):

• Q: Can I use this adapter with any electric vehicle?
  A: The EcoFlow DELTA Pro EV X-Stream Adapter is compatible with electric vehicles that support J1772, Mennekes, or GB/T connectors based on your region.

• Q: What should I do if the adapter gets wet?
  A: If the adapter comes into contact with liquid or gets wet, disconnect it from the power source immediately and allow it to dry completely before using it again.

Product Illustration

Product Parameter

• Model number: EFD500-CC
• Output voltage: 100–240 V 50/60 Hz
• Maximum input/output power: 3400 W max
• Input voltage: 100–240 V 50/60 Hz
• Operating temperature: -10°C to 45°C

How To Connect

Tip:
Pay attention to aligning the connector locations when connecting.

Safety Tips

• Make sure that the EV charger, DELTA Pro EV X-Stream Adapter and the Infinity Port are inserted into place before use;
• It is strictly forbidden to allow this product to come into contact with any liquid. Do not immerse this product in water or get it wet.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:
This equipment has been tested and found to comply with the limits for a Class A digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instruction manual, may cause harmful interference to radio communications. Operation of this equip-ment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>