leveone IGP-0102 Industrial Gigabit POE Injector User Guide
- June 4, 2024
- leveone
Table of Contents
leveone IGP-0102 Industrial Gigabit POE Injector
Power connection
This unit provides 4 pin terminal block. The PoE port can be operated from 48-56VDC power source input.
Power connecting procedure:
- STEP 1 – Pull out 4 pin terminal block.
- STEP 2 – Connect wire to V1+, V1-, or V2+, V2-, and Ground the neutral wire to the ground screw.
- STEP 3– Plug back 4 pin terminal block to its place.
Read User Manual Online (PDF format)
Loading......