WATT BOX WB Acc Trigger Momentary Installation Guide
- June 17, 2024
- WATT BOX
Table of Contents
INSTALL GUIDE
WB-ACC-TRIGGER
The WattBox Trigger provides users with an easy way to cycle power on any or all of the outlets on a WB-IP device.
Package Contents
- WattBox Trigger (normally open, momentary closed) switch with adhesive backing
Installation
Position the switch in the desired location, then connect to the “REMOTE
TRIGGER” port on the WattBox using the phoenix connector included with the IP
device. Then log into the WB-IP interface to enable the trigger port and
select which outlets to power cycle.
Extend wiring up to 45’/13.7m using Cat5 or
other conductors 24AWG or larger. Wires can be connected either way (no
polarity).
Warranty & Regulatory
Find details of this product’s 2-Year Limited Warranty at snapav.com/warranty, or request a paper copy from Customer Service at 866-424-4489. Find other legal resources, such as regulatory notices and patent information, at snapav.com/legal.
Technical Support
Phone: 866.838.5052
Email: TechSupport@SnapAV.com
Copyright ©2021, Wirepath Home Systems, LLC. All rights reserved. Control4 and SnapAV and their respective logos are registered trademarks or trademarks of Wirepath Home Systems, LLC, dba “Control4” and/or dba “SnapAV” in the United States and/or other countries. 4Store, 4Sight, Control4 My Home, Snap AV, Araknis Networks, BakPak, Binary, Dragonfly, Episode, Luma, Mockupancy, Nearus, NEEO, Optiview, OvrC, Pakedge, Sense, Strong, Strong Evolve, Strong Versabox, SunBriteDS, SunBriteTV, Triad, Truvision, Visualint, WattBox, Wirepath, and Wirepath ONE are also registered trademarks or trademarks of Wirepath Home Systems, LLC. Other names and brands may be claimed as the property of their respective owners. All specifications subject to change without notice.
210224-1322
https://manual-hub.com/
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>