tech4home G8LTBLE01 Gen 8 Lite Remote Control Unit User Guide
- June 6, 2024
- tech4home
Table of Contents
tech4home G8LTBLE01 Gen 8 Lite Remote Control Unit
GEN 8 LITE Remote control
Turn on the GEN 8 LITE
GEN s LITE remote control arrives with a 3 AAA batteries blister insid13 a
polybag.
To turn on your GEN s LITE remote1 control, please follow the instructipns
below.
Turn ON your TV and your Set Top Box
Remove your GEN s LITE remote control and the batteries from the plastic bag. Remove the battery lid. Place the batteries on the GEN s LITE remote control as indicated in the image above and close it with the battery lid. After place the batteries, wait a few seconds and the GEN s LITE is ready to operate.
GEN 8 LITE CONTROL YOUR TV
GEN s LITE remote control is able tio control your TV. This feature is qalled
Quick Search by Brand.
To setup your remote control, please follow the example below.
- Turn on your TV.
- In your GEN s LITE remote control, press and hold by 3 seconds the TV power key and the digit key which refers to your TV model. 1
- The RCU confirms Setup mope activation by turning on the LED. The MIC LED remains on while Quick Search by Bran9 is active 4. Release the keys. 1
- Press and release the Power1 key until your TV turned off. Once your TV is turned off, the setup is completed. Now you can control your TV volume, mute and power on/off.
FCC Compliance Statements
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determinate by turning the equipment off an on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio TV technician for help.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.