SKYWORTH SW901E Stand Alone VR Headset User Guide

Standalone VR Headset
6TFS(VJEF

What’s inside the box

Please check whether there are the following items in the box:

Instructions for Equipment Components
1. Standalone VR headset 2. 3-DOF Controller

Basic operation

Instructions for key/interface/status indicator of head-mounted equipment

Headset key| Operation description|
---|---|---
Power key| Long press for 2 seconds
Long press for 3 seconds| Power on
Calling up reboot a ( power off the interface
Confirm key| Short press Long press for 3 seconds| Enter/Confirm Scene and anchor correction
Back key| Short press| Back
Home key| Short press| Back to home page
Volume key| Adjusting volume|

Note Long press for 6 seconds to fast power offIn case of downtime, long- press for10 seconds to forcibly reboot.

and play status
Micro USB port| Charging/Data transmission
Micro SD card slot| Plug/unplug Micro SD card
Headset indicator status| Status description
---|---
The blue light keeps on| In charging. and the current power>90% When it is not in charging and the screen is on, and the current power>90%
Pink light on| charging. and 20%< the current powa <90%. When it is not in charging and the screen is on. and 20%< the current power <90%
The red light keeps on| In charging. and the current power<20%
Red light flashes| When it is not in charging and the screen is on, and the current<20%
Power on/off| Red light flashes fast for 1 second

Instructions for controller indicator

Important Notice

In order to protect you and others from injury or protect your equipment from damage, please read the following safety information before using the device.

1. Only use the equipment for its intended purpose.

2. It is recommended to be used in environments with temperatures ranging from-10t — 45t and humidity:: – 80%. Avoid exposing the equipment to environments of strong sunlight or high temperature.

3. Batteries (battery packs or combination batteries) should not be exposed to such conditions as sunshine, fire or similar overheating.

4. Do not use it in any environments with chemical or flammable gases, long-time high temperature and humidity, containing gases and dust that is sufficient to con-ode metals and destroy insulation, containing explosive hazards or other abnormal conditions.

5. It is recommended to take proper rest after 30 minutes Of use. Please stop using it immediately, If you feel any discomfort in your body.

6. It is recommended that those with abnormal physical Conditions (including but not limited to pregnant women, the elderly, binocular vision abnormalities, heart disease patients, psychiatric patients) Consult a doctor before deciding whether to use it.

7. This equipment is not specially designed for children. Children under 14 Years Old should use it under the supervision of adults. If negative effects are found, stop using it immediately. Adults should abo ensure that children under 14 years old do not use this equipment for too long time.

8. When using this equipment, make sure that the area around is safe. Make sure that there are no other people, furniture, fixtures, and other obstacles in the user area. Do not use this equipment near stairs, windows, balconies, heat sources, or other objects that may cause danger.

9. Do not connect a USB data cable while wearing this device.

10. The device can transmit radio waves that may interfere with the operation of nearby eleCtronic devices. If the user wears a heart pacemaker or other implantable medical device, please consult a doctor or a medical device manufacturer before deciding whether to use it.

11. Do not use this equipment with a high volume for a long time to avoid hearing damage.

12. Avoid lens contact with hard and sharp objects when using, use a matching soft cloth and water to wipe, do not use Organic solvent to wipe.

13. Please pay attention to the correct placement method, the wrong placement methOd Can easily lead to strong light damage to the screen.

14. 1f the device is overheated due to prolonged use, it may cause interface drift. Please long-press the Enter key for correction.

Product warranty regulations

During the validity period of three guarantees, you can enjoy the following three guarantee services with the invoice or valid purchase certificate due to the quality problems of the product itself and non-human damage:
Within 7 days from the date of purchase, the quality problems of the device occur, which can be identified by the after-Sales service center. Consumers can choose to return, exchange or repair the device.
Within 15 days from the date of purchase, the quality problems of the device occur, which can be identified by the after-sales service center. Consumers can choose to exchange or repair the device.
Within 12 months from the date of purchase, the quality problems of the device occur, which can be identified by the after-sales service center. Consumers can get the device repaired for free.

The limited warranty does not cover:

The product has exceeded the validity period of the warranty.
Defects or damage resulting from improper usage, maintenance, or storage not included In the manual;
Defects Or damage resulting from unauthorized dismantling, alteration, and maintenance; lighting, management, etc; by force majeure such as fire, flood, and Damage resulting from improper use (such as falling, extrusion, liquid intake, etc.);
Damage to the product caused by any unauthorized modifications;
Damage caused by installing unauthorized operating Systems; PaCking box or gifts other than the main device;

Statement of hazardous substances

Toxic or harmful substances or elements

Structure,
Parts| x| 0| 0| 0| 0| 0
Circuit module| | 0| 0| 0| 0| 0
It indicates that the content o the harmful substance in au homogeneous materials of the component should be limited according to SJ/T 11363-2006( Limited Requirements for Toxic and Hazardous Substances in Electronic Information Products)
x It indicates that the toxic or hazardous substance contained in at least one of the homogeneous materials of the part exceeds the limit requirement specified in SJ/T 11363-2006.

If you want to know more information about Skyworth VR or give us your feedback, please check our website:
www.skyworth.com
After-sales service
E-mail [email protected]
Customer service
hotline: 0755-26010716
This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Specific Absorption Rate (SAR) information:
This device meets the government’s requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluations of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement the SAR limit of the USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: Stand-Alone VR Headset (FCC ID: 2A2YGSW901E) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use when properly worn on the head, with no separation. To meet RF exposure guidelines and reduce exposure to RF energy during the operation, this equipment should be positioned at least this distance away from the head.

Users fill out

User Information
Name…………………………………….
Contact Information…………………………………..
E-mail……………………………..
Address…………………………………….
Postcode……………………………

Product Information

Product model………………….
Purchase date……………………….
Device SN number (see device label)……………………..

Distributors fill out

Distributor Information
Distributor name…………………………………….
Contact number………………………………………….
Address…………………………………………..
Postcode………………………………………..
Invoice number…………………………………………
Sales date………………………………………………….

Maintaining record

Maintenance date| Fault causes| Processing result| Date of delivery| Maintenance and Repak Centre| Contact number| Maintenance man’s signature
---|---|---|---|---|---|---
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>