SKYWORTH SEB004 Bluetooth Headset Instruction Manual Product Information
- June 1, 2024
- SKYWORTH
Table of Contents
SEB004 Bluetooth Headset
Product Information
Specifications
- Bluetooth pairing name: SKYWORTH-SEB004
- Bluetooth version: Bluetooth 5.3
- Bluetooth chip: AB5656
- Support protocols: HFP/A2DP/AVRCP
- Connection distance: 10 meters
- Battery type: 35mAh polymer battery
- Music playing time: About 6 hours (100% volume)
- Call time: About 5 hours (100% volume)
- Charging time: 1.5 hours
- Speaker specification: 17x12mm
Product Usage Instructions
Charging
Ensure that the port is clean and dry before charging the
Bluetooth earphones.
Power On/Off
To power on the device, put the earphones in the charging
compartment and take them out or hold down the MFB area for 3
seconds. To turn off the device, put the headphones into the
charging compartment or they will automatically turn off when there
is no battery.
Bluetooth Connection
Take out the earphones from the charging case and turn on the
Bluetooth function of your device. Search for Bluetooth and click
on the Bluetooth name SKYWORTH-SEB004 to connect. Turn on the
Bluetooth function of your device again, take out the earphones,
and they will connect automatically.
Operation
-
Play/Pause: Double click the left/right MFB key
-
Previous Song: Three clicks on the MFB button on the left
ear -
Next Track: Three clicks on the MFB button on the right
ear -
Answer Phone Call: Double click the left/right MFB button
-
Hang Up: Double click the left/right MFB button
-
Reject Call: Long press the left/right MFB button for 2
seconds -
Volume Increase: Long press the right MFB button
-
Volume Decrease: Long press the left MFB button
-
Voice Assistant: 4-click left/right MFB key
Reset
To reset, press and hold the MFB key five times.
Wear
To improve hearing experience, adjust the angle of the headset
when using it.
Frequently Asked Questions (FAQ)
Q: How do I reset the Bluetooth earphones?
A: Press and hold the MFB key five times to reset the
device.
Q: What is the music playing time of the earphones?
A: The music playing time is about 6 hours at 100% volume.
Operating Instructions
Charge
NN
Power on/off
Bluetooth connection
operate
Ensure that the port is clean and dry before charging.
Bluetooth Settings
Bluetooth Settings
My device SEB004
Put the earphones in the charging compartment,Take out the power or hold down
the MFB area for 3 seconds to turn on the device;
Put the headphones into the charging compartment and turn them off, or they
will automatically turn off when there is no battery.or hold down the MFB area
for 3 seconds to turn on the device;
Take out the earphones from the charging case and turn on the Bluetooth function of the device,Search for Bluetooth and click on the Bluetooth name “SKYWORTH-SEB004” to connect.Turn on the Bluetooth function of the device again, take out the earphones and connect them automatically.
Play pause: Double click the left/right MFB key Previous song: Three clicks on the MFB button on the left ear Next track: Three clicks on the right ear MFB button Answer phone call: Double click the left/right MFB button Hang up: Double click the left/right MFB button Reject call: Long press the left/right MFB button for 2 seconds Volume increase: Long press the right MFB button Volume decrease: Long press the left MFB button Voice Assistant: 4-click left/right MFB key
Reset
Press and hold the MFB key 5 times
Wear
For a better hearing experience, adjust the angle of the headset when using
it.
Product specifications
Bluetooth pairing name SKYWORTH-SEB004 Bluetooth version:Bluetooth 5.3
Bluetooth chip:AB5656 Support protocols:HFP/A2DP/AVRCP Connection distance:10
meters Battery type:35mAh polymer battery Music playing time:About 6 hours
(100% volume) Call time:About 5 hours (100% volume) Charging time:1.5 hours
Speaker specification: 17x12mm
Horn impedance:16±15%
MIC sensitivity:-36±3db
Warning notes
Changes or modifications that are not expressly approved by the party
responsible for compliance may result in the loss of the user’s right to
operate the device. The equipment has been tested.And meet the limitations of
Class B digital devices. These restrictions are intended to provide reasonable
protection for residential facilities against harmful interference. The
equipment generates and radiates RF energy, which can cause harmful
interference to radio communications if it is not installed and used in
accordance with the instructions. However, there is no guarantee that
interference will not occur during a particular installation. If the equipment
does cause harmful interference to radio or television reception,This can be
determined by turning the device off and on, encouraging the user to try to
correct the interference by one or more of the following measures:
–Reposition or relocate the receiving antenna. –Increase the distance between
the device and the receiver. –An exit that connects the device to a circuit
different from the one to which the
receiver is connected. –Seek help from distributors or experienced radio/TV
technicians. The following two conditions must be met when operating:(1)The
equipment can not cause harmful interference;(2)This equipment must accept any
interference received, This includes interference that may result in undesired
operations. The device has been evaluated to meet General RF exposure
requirements.
Packing list A pair of Bluetooth headphones 1 data cable operation
instructions Certificate of conformity 1 charging case
warranty service Dear user, thank you for choosing Skyworth intelligent
wearable products. Products purchased through legitimate channels are entitled
to the three guarantees services stipulated by the state in accordance with
the law.You can learn the specific details through the official QR code.
Official QR code of Xiaowei Health Technology
Product SN label
Warranty Card
Warranty Notice:
This three guarantee certificate is only applicable to the three guarantee
services of the host. Please take good care of this three guarantee
certificate and enjoy the three guarantee services,Please present this voucher
and relevant invoices. Artificial damage is not covered by the warranty.
Please refer to the service policy. of the operator’s WeChat official account
for the specific scope of warranty. Damage caused by physical pressure or
other uncontrollable factors during product use is not covered by warranty.
Those that have exceeded the warranty period are not covered by the warranty.
The product can only receive maintenance services in the Chinese region
Model
Dealer Name
Dealer phone number
sale date
Seller address
User Name
User phone number
product nameBluetooth headset ModelSEB004 OperatorShenzhen Hongpuxin
Electronic Technology Co., Ltd Carrier addressBuilding 4, Tongfu Industrial
Park, Aiqun Road, Shiyan Street,
Bao’an District, Shenzhen manufacturerXiaowei Health Technology (Shenzhen)
Co., Ltd Manufacturer AddressC501, Skyworth Building, No. 008 Gaoxin South 1st
Road,
Yuehai Street, Nanshan District, Shenzhen ManufacturerJiangmen Hongpuxin
Electronic Technology Co., Ltd Manufacturer’s addressHongpuxin Science and
Technology Park, No. 50 South
Industrial Avenue, Hecheng Town, Heshan City, Jiangmen City, Guangdong
Province Service hotline400-881-5152