COSTWAY JB10001 Hairdressing Chair User Manual
- June 6, 2024
- COSTWAY
Table of Contents
COSTWAY JB10001 Hairdressing Chair
**User Manual**
cs.us@costway.com
cs.uk@costway.com
cs.au@costway.com
Before You Start
Please read all instructions carefully.
Retain instructions for future reference.
Separate and count all parts and hardware.
Read through each step carefully and follow the proper order.
We recommend that, where possible, all items are assembled near to the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.
Always place the product on a flat, steady and stable surface.
Keep all small parts and packaging materials for this product away from babies and children as they potentially pose a serious choking hazard.
NOTICE:
If your package has missing parts or you are having issues with assembly, please call us directly or message us, our customer service team will address any questions or concerns you may have. Keep this manual for future reference.
SAFETY
To reduce risk of injury when assembling & using the chair, follow these precautions:
- Read all of these instructions before assembling and using your salon chair.
- It is helpful to have 2 people assemble and turn the chair upright after assembling.
- Do not over-extend the chair(weight capacity 150 kg), otherwise it may cause the risk of falls or tipping the chair, and its occupant over, resulting in injury.
PARTS & FEATURES
INSTALLATION INSTRUCTION
First, install the pump to the base
Step 1. Install the pump to the base with 6 black bolts .
Step 2. Place the assembled Base & Pump on the floor. Use the Allen
Wrench to loosen the screws in the crossbar. Insert the Foot Bar into the
holes of the crossbar. (It may be necessary to slightly squeeze ends of the
Foot Bar towards each other, and some maneuvering for the bar ends to go into
place.)
Step 3. Tighten the 2 set screws to firmly hold the Foot Bar in place.
Second, install the armrest
Step 1. Install the left armrest and right armrest to the seat with the 6
bolts and washers. Please follow the diagram as shown.
Step 2. Remove the 4 bolts which pre-fixed in the left armrest and right
armrest. Install backrest connectors to the left armrest and right armrest
with the 4 bolts. Please follow the diagram as shown.
Third, install the backrest to the assembled seat
Step 1. Remove the 4 bolts which pre-fixed in the backrest.
Step 2. Install backrest to the backrest connectors with the 4 bolts .
Please follow the diagram as shown.
Fourth, install foot pedals in the leg support
Step 1. Remove the 2 bolts which pre-fixed in the footrest.
Step 2. Install the footrest to the leg support with the 2 bolts.
Please follow the diagram as shown.
Fifth, install the footrest to the seat
Step 1. Remove the 2 bolts which pre-fixed in the seat.
Step 2. Install the leg support to the seat with 2 bolts. Please follow
the diagram as shown.
Sixth, set the seat onto the top of pump
Step 1. Locate the slot in the short column under the Seat. Align this
slot with the black pin at the top of pump.
Step 2. Set the installed Seat & Backrest onto the installed Pump & Base
and press down. Please follow the diagram as shown.
OPERATING THE CHAIR
First:
- In the natural state, the upper part of the pump can rotate freely on the rotation axis of the pump;
- Hold up the foot bar to lock the rotating .
Second : Raising the Chair
- Step down on the Foot Bar repeatedly to raise the chair to the desired height.
- Do not over-extend the chair, creating the risk of falls or tipping the chair and its occupant over, resulting in injury.
Third : Lowering the Chair
- Step down and hold the Foot Bar to allow chair to lower.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>