wallbox Single Phase Energy Meters Installation Guide
- June 6, 2024
- wallbox
Table of Contents
wallbox Single Phase Energy Meters
Purpose and Scope of the Document:
The purpose of this document is to outline the instructions for installation
of energy meters compatible with the Power Boost and Eco-Smart
functionalities.
For instructions to install an MID meter, refer to the relevant Installation
Guide.
Important Notes
- After the installation, connect the energy meter before closing your charger. In case the charger had already been installed, open it to connect the energy meter.
- Only energy meters delivered by Wallbox are compatible.
- The installation must be performed only by suitably qualified personnel, according to local regulations.
- Make sure to update your charger with the latest software version before installing the meter.
- Ensure the charger is powered off before connecting the meter.
- For more information, refer to your charger’s Installation Guide on Wallbox Academy.
Materials and Tools
Inside the Box
Devices
Tools
Compatibility Table
| Meters | Power Boost | Eco-Smart |
|---|---|---|
| EM340 | PF.A / PF.B | PF.B |
| EM112 | PF.A / PF.B | PF.B |
| SPM1-100-AC | **** | **** |
EM330
CTA 5X 250 A 5A CTA 6X 400 A 5A CTD-6S 600 5A
| |
N1CT| |
PRO2 MOD| |
PRO380 MOD| |
Placement
-
Place the energy meter after the mains supply in the fuse box.
-
For all the meters, follow the corresponding manual included in the box.
Note : For the EM340 and the EM112 meters, only the PF.B versions are compatible with the Eco-Smart functionality.For the Power Boost functionality, both the PF.A and PF.B versions of EM340 and EM112 meters are compatible. Refer the Eco-smart configuration article to know more.
SPM1-100-AC
- Used for 1-Phase installation. Up to 100A.
- Clip the power meter to the mains power cable.
- Neutral cable must not be drawn through the clamp.
Note : Ensure to insert the cable through the clamp in the correct direction as shown.
Pro MOD2 / Pro 380 MOD / N1 CT
Pulsar Plus
Commander 2
Copper SB
Configuration
Power Boost
Follow these steps to configure the Power Boost functionality.
Eco-Smart
Follow these steps to configure the Eco-Smart functionality.