eta 4892 LED Table Lamp Instruction Manual

: June 6, 2024
: ETA

Table of Contents

MAINTENANCE
ENVIRONMENTAL PROTECTION
TECHNICAL DATA
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

4892 LED Table Lamp
Instruction Manual

eta 4892 LED Table Lamp 19/8/2021
© DATE 27/2/2018 eta 4892 LED Table Lamp - figure 1

Do not bend the LED panel and protect it from any impact to prevent its damage.
Do not use the appliance in bathrooms, near showers, and in places with high humidity.
LEDs cannot be replaced.
When the lamp is on, the LEDs become warm – do not touch them.
If the lamp is not to be used for a long time, unplug the adapter from el. power.
This appliance is not intended for outdoor use.
Do not put or take out the plug to or from a socket with wet hands!
The appliance must not be used in a damp or wet environment and in any environment with the danger of fire or explosion (premises where chemicals, fuels, oils, gases, paints, and other flammable or volatile materials are stored).
Only use the appliance in the working position at places with no risk of overturning and at a sufficient distance from other objects (such as curtains, drapes, etc.), heat sources (e.g. fireplace, heater, stove, cooker, radiators, hot air ovens, grills) and wet surfaces (e.g. sinks, washbasins).
Never put the power cord on hot surfaces and never let it hang over the table edge or worktop edge. If the cord is caught or pulled, e.g. by children, the appliance may overturn and fall down, causing a serious injury!
The manufacturer assumes no responsibility for any damage caused by improper handling of the appliance and its accessories (e.g. electric shock, fire), and the appliance guarantee will become void if any of the aforementioned safety instructions are not observed.

MAINTENANCE

Do not use coarse and aggressive cleaning agents (e.g. sharp objects, scrapers, diluting agents or other solvents). Clean with a soft and wet cloth with a little detergent.

ENVIRONMENTAL PROTECTION

If the dimensions allow, there are labels of materials used for the production of packing, components, and accessories as well as their recycling on all parts. The symbols specified on the product or in the accompanying documentation mean that the used electric or electronic products must not be disposed of together with municipal waste. For proper disposal of the product, hand it over at special collection places where it will be taken over free of charge. Suitable disposal of the product can help to maintain valuable natural resources and to prevent possible negative impacts on the environment and human health, which could be the possible consequences of improper waste disposal. Ask for more details at the local authorities or in the nearest collection site. Fines can be imposed for improper disposal of this type of waste in agreement with the national regulations. If the appliance is to be put out of operation for good, after disconnecting it from the power supply we recommend cutting off the power cord and thus it will not be possible to use the appliance again. More extensive maintenance or maintenance requiring intervention in the inner parts of the appliance must be carried out by professional service! Failure to comply with the instructions of the manufacturer will lead to the expiration of the right to warranty repair!

TECHNICAL DATA

3 light colour settings / 3 brightness settings
USB power connector for phone charging
Colour temperature: 2800 – 5700K
Life: up to 35,000 hours
Material: ABS+ PC+ aluminium
Voltage: AC 100-240V 50/60HZ; 12V/ 1.0A
Weight: 855 g
Degree of protection: IP 20
Input in off mode is < 0,50 W| High-quality SMD2835 chip
Luminous flux: max. 500 Lm
Illumination angle: 120°
Energy rating: F
Colour: dark grey
Dimensions: 10,2 x 40,2 x 45,4 cm
Input: 9 W
USB: 1 output port 5V 1A
---|---

The manufacturer reserves the right to change the technical specifications and accessories for the respective models.

Notice