anko 43126255 Vlogging Starter Kit Instruction Manual
- June 6, 2024
- Anko
Table of Contents
Vlogging Starter Kit
Keycode: 43126255
Instruction Manual
Safety Instructions:
Please read the instruction manual before using this device and follow all the safety instructions to avoid damage caused by improper use.
- Keep the instruction manual for future reference. Should this device be given to a third party, then this instruction manual must also be handed over.
- Keep the device away from all hot surfaces and naked flames.
- Do not immerse the device in water or in other liquids.
- Do not use the device in wet conditions.
- Do not use the tripod in windy conditions or on an uneven surface.
- Do not use the device if it is damaged.
- This device is not a toy. Children should be supervised to ensure they do not play with the device.
Packaging include:
LED light x1
Microphone x1
Foldable Tripod Stand x1
Phone clip x1
3.5mm Aux cable for smartphone x1
Use
- Mount phone clip on the tripod stands with the 1/4 inch mounting screw.
- Adjust the width/length and place your smartphone in the phone holder.
- Attach the LED light to the phone clip then tighten the cold shoe mounts.
- Attach the microphone to the LED then tighten the cold shoe mounts.
- Unfold the tripod legs and place it on a flat surface, both press the angle adjust button to select the desired angle.
- Put in 2 x AA batteries (not included) into the LED light backside. Long press the power button to turn on /off the light. Short press the brightness button to adjust the brightness.
- Plug one side of 3.5mm AUX cable into the microphone, then plug another side into your phone.
Note: Smartphones without a 3.5mm jack will require an adapter such as Lightning to 3.5mm for iPhones or USB-C to 3.5mm for certain Android devices. (Adapters not included)
Specification
- LED Light: Power:5 W;
- LED Light working voltage: DC 3V
- LED Light Battery:2 X AA batteries (Not included)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>