Lechpol ZAR0550-1 Rechargeable LED with Magnet and Motion Sensor Instruction Manual
- June 8, 2024
- Lechpol
Table of Contents
Lechpol ZAR0550-1 Rechargeable LED with Magnet and Motion Sensor
Safety instruction
- If the device or any of its part is damaged, do not use it. Do not repair the device yourself. Contact with an authorized service point for check-up/repair.
- Do not cover the device.
- Do not look directly at LED light beam!
- Clean the device with soft and dry cloth. Do not use chemical detergents.
Operating
- Stick the base with metal plate in the place where the lamp is installed.
- Place rear part of the lamp against the steel plate – the magnet inside the lamp will connect both elements
- To turn on the lamp, slide power switch on the side of the housing.
- To charge the device, using provided cable, connect it to a compatible USB port on a computer or to power supply.
Specification
- Light source: 6 SMD 2835 LED
- Power: 0,6 W
- Color temperature: 4000 K Luminous flux: 40 lm
- CRI: ≥80
- Lifespan: 15000 h
- Motion sensor:
- Range max. 3 m
- Viewing angle: 60º
- Battery: 550 mAh
- Charging time: 2 h
- Working temperature: 25°C
- Dimensions: 68 x 15 mm
- Weight: 55 g
- In set: USB-C cable, steel plate, user’s manual
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate
collection systems) This marking shown on the product or its literature,
indicates that it should not be disposed with other household wastes at the
end of its working life. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, please separate this from other types
of wastes and recycle it responsibly to promote the sustainable reuse of
material resources. Household users should contact either the retailer where
they purchased this product, or their local government office, for details of
where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product should not be mixed with
other commercial wastes for disposal.
Made in China for Lechpol Electronics Leszek Sp.k., ul. Garwolińska 1, 08-400 Miętne.