Orbegozo PWS 0166 High Velocity Fan Instruction Manual
- June 6, 2024
- Orbegozo
Table of Contents
HIGH VELOCITY FAN – INSTRUCTION MANUAL
PWS 0166
Sonifer, S.A.
Avenida de Santiago, 86
30007 M urcia España
E-mail:sonifer@sonifer.es / web:
www.orbegozo.com
Made in P.R.C.
Read this manual carefully before running this appliance and save it for reference in order to obtain the best results and ensure safe use.
Description of the Parts
- Front grille
- Blades
- Screw set
- Screws
- Rear grille
- Motor
- Speed switch
- Screw set
- Male supporter
- Inlet tube
- Plastic knob
- Oulet tube
- Cover ring
- Bolt
- Coupling
- Cast iron base
General Safety Instructions
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children must never play with the appliance. Cleaning and user maintenance must never be carried out by children without supervision.
- Children should be supervised to ensure that they do not play with the appliance.
- Keep the appliance and the cable cord out of the reach of children less than 8 years old.
- WARNING: In order to ensure your children`s safety, please keep all packaging (plastic bags, boxes, polystyrene etc.) out of their reach.
- If the supply cord is damaged it must be repaired by the Authorized Service Agent.
- Never pull on the cord when unplugging.
- Do not use the unit with a damaged cord or plug, or if it is not working properly.
- Do not handle the appliance with wet hands.
- Never immerse the appliance in water or any other liquid.
- Make sure the appliance has been unplugged before cleaning.
- This appliance must be installed following the national regulations for electrical installations.
- This appliance is for household use only.
- In case that you need a copy of the instruction manual, you can ask find it in our website:www.orbegozo.com
- WARNING: In case of misuse, there is a risk of possible injury.
- Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions, or in dropped or damaged in any manner. Follow warranty instructions.
- Place fan on a flat, level surface to avoid tapping.
- Do not operate the fan without the front grille attached.
- Never insert fingers, pencils or any other object through the grille when fan is running.
- Disconnect the plug when moving from one location to another.
- Disconnect plug when removing guards for cleaning.
- Be sure fan is on a stable, even surface when operating to avoid overturning.
- DO NOT use fan in window. Rain may create an electrical hazard. Do not leave the fan operating adjacent to an area where water has been collected to avoid the potential of electrical hazard.
- This product is only designed for use in living areas (and is not suitable for places constantly exposed to humidity).
- Do not place the fan near flames, cookers or heaters.
- Do not obstruct the air flow.
ASSEMBLE
- Remove the screw from bottom side of mast. Place mast on base and screw it by bottom side of the base.
- Put the fan motor on motor support of top of mast and fit it with the screw.
- Place the rear grill in front of motor and screw it. Put the blade in the motor shaft and assure it tightening its screw. To fix the front grill it is just necessary placing in front of rear grill and adjusts it with flanges of the frame.
- To amend the height of the fan just have to loosen up the screw which is perpendicular to mast and go up or go down until get the desired height. After that tighten the screw again.
OPERATING INSTRUCTIONS
- Step 1: Set the fan base on a level and stable surface.
- Step 2: Please make sure the Speed knob is in the 0 position. Plug cord into any standard AC outlet.
- Step 3: The speed is adjusted by moving the knob left or right to the desired setting (0-Off; 1-Low; 2-Medium; 3-High)
- Step 4: To connect swing function, unscrew the screw on bottom of motor and change of position as below pictures show.
No swing Swing
- If you want to amend the tilt of fan head, loosen up a bit the screw on joint of motor head and mast, move motor head to desired tilt and tight again the screw.
FAN STORAGE
The fan can be stored in the off-season completely assembled or partially disassembled. It is important that store place is dry and safe.
- If you store it disassembled, we recommend using original box, or at least a box with appropriated dimensions.
- If you store it assembled or partially disassembled, cover the fan head to protect from dust.
- You always must empty water tank if you aren’t going to use the fan for more than a week.
CLEANING AND MAINTENANCE
- Always unplug the fan before cleaning or disassembling.
- Use a damp cloth to clean the dust from the fan.
- Do not allow water to drip on or into the fan motor housing.
- Do not use any of the following as a cleaner: gasoline, thinner, or benzine.
Disposal of old electrical appliances.
The European directive 2002/ 96/ EC on Waste Electrical and Electronic
Equipment (WEEE), requires that old household electrical appliances must not
be disposed of in the normal unsorted municipal waste stream. Old appliances
must be collected separately in order to optimize the recovery and recycling
of the materials they contain, and reduce the impact on human health and the
environment. The crossed out “wheeled bin” symbol on the product reminds you
of your obligation, that when you dispose of the appliance, it must be
separately collected.
Consumers should contact their local authority or retailer for information
concerning the correct disposal of their old appliance.
DECLARATION OF CONFORM ITY: This device complies with the requirements of
the Low Voltage Directive 2014/ 35/ EU and the requirements of the EM C
directive 2014/ 30/ EU.
Documents / Resources
|
Orbegozo PWS 0166 High Velocity
Fan
[pdf] Instruction Manual
PWS 0166, High Velocity Fan
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>