S15 Active Noise Cancelling Bluetooth 5.0 Earbuds User Manual
- June 6, 2024
- Earbuds
Table of Contents
S15 Active Noise Cancelling Bluetooth 5.0 Earbuds
User Manual
V5.0+EDR
Note:
① This product can be connected to any device with Bluetooth function.
②Please charge fully before using this product.
①． POWER ON AND RAIRING
-
Open the top cover of the charging case and turn on the headphones automatically.
-
Press the headset out of the charging case to open the Bluetooth of the mobile phone, search for the “S15” of the Bluetooth device,
select the connection, and connect the device manually for the first time.
②．Pairing operation
Automatic pairing: after successful pairing, the slow flashing blue light in both ears will be turned off.
(Note: if there is no pairing, the red and blue lights in both ears will flash alternately. When the headset is turned on and not connected to the phone, double-click on the right ear to pair it. After the pairing is successful, the slow blue lights in both ears will be turned off.)
③．POWER OFF
-
Put the earphones in the charging case correctly, earphones will AUTO-OF.
-
Earphone will shutdown automatically in 3mins after disconnected with devices
-
Touch either earphone for 3s to shutdown manually.
-
The battery status of earphones is visible on connected devices.
④．PHONE&MUSIC
-
To Answer(End)A Call
Touch either earphone one short -
To Reject A Call
Touch either earphone for 2S -
To Play and Pause Music
Touch either earphone one short -
To Play the next/previous song
A triple touch on left(right)earphone for previous or next song. earphone will emit a beep sa response. -
Add and subtract volume
Add Volume: Touch Left Headphone twice
Subtract volume: Touch Right Headphone twice
⑤．VOICE ASSISTANT
TAP INTO Siri ( ios)
For APPLE user,talking to your favorite
personal assistant is a cinch. Just touch either earphone for 2s to activate siri,without taking your iphone out of your pocket.
Android OS
Make sure your android smart phone support voice assistant, touch either earphone for 2s to activate Siri,without talking your Phone out of you pocket.
⑥．CHARGING CASE SPECIFICATION
Charging case capacity – 220mAh
Earbuds capacity – 35mAh
Iput – DC 5V 1A
Charging time – About 90mins
Cruising ability – Cruising charging about 2 times
Full charge state – The white light is always on
Charge the headphones – Warehouse green light is always on, full out
Product status
|
Description
---|---
Base charging state
|
The white light flashing
Earphone low voltage
|
Red light flashing slowly, prompt sound: battery low
Charging indicator for earphones
|
No indicator light
Headset description
Note
- Don’t disassemble, press the product with heavy thing, far away from high temperature and humidity environment
- Far away from WIFI and route etc. radiation equipment.
- Recharging the product every week if it is not used long time
- Restart the earbuds if some issue happened to avoid the wrong operation caused the issue.
Note: this product can be connected with any device with bluetooth function.
If you have any questions, please feel free to send an email to contact us
Email address:[email protected]
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.