audizio 102.406 Ancona DAB+ Radio Instruction Manual

audizio 102.406 Ancona DAB+ Radio

OVERVIEW

Congratulations to the purchase of this Audio product. Please read this manual thoroughly prior to using the unit in order to benefit fully from all features. Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock. Keep the manual for future reference.

•  Prior to using the unit, please ask advice from a specialist. When the unit is switched on for the first time, some smell may occur. This is normal and will disappear after a while.
•  The unit contains voltage carrying parts. Therefore do NOT open the housing.
•  Do not place metal objects or pour liquids into the unit This may cause electrical shock and malfunction.
•  Do not place the unit near heat sources such as radiators, etc. Do not place the unit on a vibrating surface. Do not cover the ventilation holes.
•  The unit is not suitable for continuous use.
•  Be careful with the mains lead and do not damage it. A faulty or damaged mains lead can cause electrical shock and malfunction.
•  When unplugging the unit from a mains outlet, always pull the plug, never the lead.
•  Do not plug or unplug the unit with wet hands.
•  If the plug and/or the mains lead are damaged, they need to be replaced by a qualified technician.
•  If the unit is damaged to such an extent that internal parts are visible, do NOT plug the unit into a mains outlet and DO NOT switch the unit on. Contact your dealer. Do NOT connect the unit to a rheostat or dimmer.
•  To avoid fire and shock hazard, do not expose the unit to rain and moisture.
•  All repairs should be carried out by a qualified technician only.
•  Connect the unit to an earthed mains outlet (220-240Vac/50Hz) protected by a 10-16A fuse.
•  During a thunderstorm or if the unit will not be used for a longer period of time, unplug it from the mains. The rule is: Unplug it from the mains when not in use.
•  If the unit has not been used for a longer period of time, condensation may occur. Let the unit reach room temperature before you switch it on. Never use the unit in humid rooms or outdoors.
•  To prevent accidents in companies, you must follow the application guidelines and follow the instructions.
•  Do not repeatedly switch the fixture on and off. This shortens the lifetime.
•  Keep the unit out of the reach of children. Do not leave the unit unattended.
•  Do not use cleaning sprays to clean switches. The residues of these sprays cause deposits of dust and grease. In case of malfunction, always seek advice from a specialist.
•  Do not force the controls.
•  This unit is with speaker inside which can cause magnetic field. Keep this unit at least 60cm away from computer or TV.
•  If this product have a built-in lead-acid rechargeable battery. Please recharge the battery every 3 months if you are not going to use the product for a long period of time. Otherwise the battery may be permanently damaged.
•  If the battery is damaged please replace with same specifications battery. And dispose the damaged battery environment friendly.
•  If the unit has fallen, always have it checked by a qualified technician before you switch the unit on again.
•  Do not use chemicals to clean the unit. They damage the varnish. Only clean the unit with a dry cloth.
•  Keep away from electronic equipment that may cause interference.
•  Only use original spares for repairs, otherwise serious damage and/or dangerous radiation may occur.
•  Switch the unit off prior to unplugging it from the mains and/or other equipment. Unplug all leads and cables prior to moving the unit.
•  Make sure that the mains lead cannot be damaged when people walk on it. Check the mains lead before every use for damages and faults!
•  The mains voltage is 220-240Vac/50Hz. Check if the power outlet match. If you travel, make sure that the mains voltage of the country is suitable for this unit.
•  Keep the original packing material so that you can transport the unit in safe conditions.

WARNING

• This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient magnitude to cause a shock hazard.
• This mark attracts the attention of the user to important instructions that are contained in the manual and that he should read and adhere to.

The unit has been certified CE. It is prohibited to make any changes to the unit. They would invalidate the CE certificate and their guarantee!
NOTE : To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/41°F and 35°C/95°F.

Electric products must not be put into household waste. Please bring them to a recycling center. Ask your local authorities or your dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice.

Do not attempt to make any repairs yourself. This would invalidate your warranty. Do not make any changes to the unit. This would also invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings contained in this manual. Audio cannot be held responsible for personal injuries caused by disrespect of the safety recommendations and warnings. This is also applicable to all damages in whatever form.

UNPACKING INSTRUCTION

CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are present, and have been received in good condition. Notify the shipper immediately and retain the packing material for inspection if any parts appear damaged from shipping or the package itself shows signs of mishandling. Save the package and all packing materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original factory box and packing. If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.

POWER SUPPLY

On the label on the backside of the product is indicated on this type of power supply must be connected. Check that the mains voltage corresponds to this, all other voltages than specified, the light effect can be irreparably damaged. The product must also be directly connected to the mains and may be used. No dimmer or adjustable power supply.

WARNING
Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate electrical ground to avoid the risk of electrocution or fire.

CONTROL

1.   Volume control
   Rotate to adjust the volume.

2. Tuning/Enter knob
   Rotate to tune, scroll, etc. Press to confirm your inputs.

3.   On/Off button
   Press and hold to power on the device. Press to power off.

4. Mode
   Press repeatedly to cycle through various modes.

5. Preset
   Press and hold to enter the “Preset store” list. Press to= enter the “Preset recall” list.

6. Info
   Press repeatedly to cycle through various radio station info.

7. Scan
   Initiate auto-scan function in DAB or FM mode. Received stations will be stored as preset automatically.

8. Menu
   Press to enter the main menu. Use the <Tuning/Enter> knob to navigate within the main- (and sub-) menus.

9. DC 5V
   USB-C port to connect the supplied power cable.

10. USB port

11.  Headphone jack 3.5mm headphones output jack.

12. Antenna

GETTING STARTED

The radio is powered by a built-in lithium battery. A USB-C type cable is supplied in the product package. Press and hold the <Power on/off> button to power on. To power off the radio, press the same button briefly.

CHARGING BATTERY
You can check the battery power level on the radio with the battery indicator in the top right corner of the display. When battery power is low, “Battery Low” will appear on the display to inform you. To charge the battery, connect the USB-C plug to the port on the back of the radio, connect the other end to a power source supplied with 5V OUT. The LED will light up in red, indicating the battery is charging. If the radio is OFF while charging, the LED will go off when charging is finished. If the radio is ON when charging, the LED remains red even when charging is completed. Please check the battery indicator to see the charging status.

DAB RADIO
DAB scan
The first time you power on the radio, it will scan the DAB radio stations automatically. It will display and play the first station after the scan is done. In case it displays “DAB No Station!”, pressing the button will initiate the Full scan of the DAB stations.

Tune DAB station
After the scan is done, rotating the <Tuning/Enter> knob will enter into the station list. Select the station you want to listen to and press the <Tuning/Enter> knob to confirm. The station will start to play.

DAB main menu
There are other options available under DAB mode. Press the